Loading ...
Loading ...
Loading ...
24
MAINTENANCE
Prior to any maintenance work or changing
parts, disconnect the appliance from the gas and
electricity power sources.
Warning: Servicing should be carried out only
by authorised personnel.
REPLACING THE TAPS
Proceed in the following way when replacing a tap:
• Remove pan supports, burner heads.
• Unscrew the burner xing screws (Vc) (g. 23).(four
for ultrarapid burner and two for the other burners)
• Pull out the knobs.
• Unscrew the six xing screws (Vp) (g.23) which
lock the side proles and remove it.
• Remove the hob, unscrewing rear xing screws
(Vs) (g. 23) which lock the hob at the supports (S).
• Unscrew the nuts (D) of the gas aluminium pipes
and pull out the thermocouple quick connectors (F)
(g.25).
• Unscrew the screws (Vt) (g. 24) which lock the
crosspieces.l
• Unscrew the screws (Vb) (g. 24) which unite the
the bridles of the taps to the front frame.
• Make to slip the ramp toward the back part and
unscrew the screws (Vb) (g. 25) in order to free the
taps.
• Change seal each time a tap or a thermostat is
replaced. This will ensure perfect retention between
the tap or a thermostat and part.
.
!
"
#$
!"
!"
!#
INSTRUCTIONS FOR THE INSTALLER
24
25
• Reassemble all the parts following the same
procedure but in the reverse order
!"
!#
!$
!%
&
'
!(
)
23
Loading ...
Loading ...
Loading ...