Greenworks 2016602 24V 12" Brushless Chainsaw w4.0 Ah USB Battery

User Manual - Page 8

For 2016602.

PDF File Manual, 48 pages, Read Online | Download pdf file

2016602 photo
Loading ...
Loading ...
Loading ...
8 INSTALLATION
W
ARNING
Do not change or make accessories that are not
recommended by the manufacturer
.
W
ARNING
Do not install battery pack until you assemble all the parts.
8.1 UNPACK THE MACHINE
W
ARNING
Make sure that you correctly assemble the machine before
use.
W
ARNING
If parts of the machine are damaged, do not use the
machine.
If you do not have all the parts, do not operate the
machine.
If parts are damaged or missing, contact the service
center.
1. Open the package.
2.
Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
8.2 ADD THE BAR AND CHAIN OIL
Examine the amount of oil in the machine. If the oil level is
low
, add the bar and chain oil as follows.
IMPOR
TANT
Use bar and chain oil that is only for chains and chain
oilers.
NOTE
The machine comes from the factory without bar and chain
oil.
1. Loosen and remove the cap (6) from the oil tank.
6
7
14
2. Put the oil (14) into the oil tank.
3. Monitor the oil indicator (7) to make sure that no dirt gets
into the oil tank while you add the oil.
4.
Put the oil cap on.
5. Tighten the oil cap.
6. A full oil tank will last for approximately 20- 40 minutes.
IMPOR
TANT
Do not use dirty, used or contaminated oil. Damage can
occur to the bar or chain.
8.3 INSTALL THE BATTERY PACK
18
1
5
W
ARNING
If the battery pack or charger is damaged, replace the
battery pack or the char
ger.
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
Read and understand the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack (15) with the
grooves in the battery compartment.
2.
Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.4 REMOVE THE BATTERY PACK
1. Push and hold the battery release button (18).
2.
Remove the battery pack from the machine.
9 OPERATION
NOTE
Remove the battery pack and keep hands clear of the lock
out button when you move the machine.
IMPOR
TANT
Examine the chain tension before each use.
8
English
EN
Loading ...
Loading ...
Loading ...