Loading ...
Loading ...
Loading ...
Problem solving guide
61
Problem Possible cause and remedy
Liquid has entered the
extractor.
Due to boiling over or spillage, liquid has made its
way through the extraction grille into the extractor.
The base of the grease filter can hold approx. 250ml
of liquid. The drip tray underneath the housing can
hold a further 250ml of liquid.
Switch the extractor off.
Clean the grease filter, the drip tray and the inside
of the housing (see “Cleaning and care”).
Extraction performance
has decreased.
Extraction noise has
increased.
Objects (e.g. a cloth) have been drawn into the
extractor.
Switch the extractor off.
Remove the grease filter (see “Cleaning and care”).
Remove any objects from the grease filter.
The sensor is lit up. The charcoal filter needs to be reactivated.
If the extractor is being operated in Recirculation
mode, reactivate the charcoal filter as described in
the operating and installation instructions supplied
with the recirculation box. Reset the operating
hours counter (see “Cleaning and care – Resetting
the charcoal filter operating hours counter” in
these operating and installation instructions).
If the extractor is being operated in Extraction
mode, reset the operating hours counter (see
“Cleaning and care” – Resetting the charcoal filter
operating hours counter” in these operating and
installation instructions).
The sensor is lit up. The grease filter must be cleaned.
Clean the grease filter as described in the section
“Cleaning and care – Grease filter/Extraction
grille”.
Loading ...
Loading ...
Loading ...