Loading ...
Loading ...
Loading ...
en-US
6
References to illustrations
The illustrations referred to in the text
are shown at the end of these operat-
ing instructions.
Features of the Electrobrush
The roller brush in the Electrobrush is
motor-driven.
The Electrobrush removes deep-seated
dirt and prevents areas of frequent use
from becoming a path.
Two of the four rollers are height-ad-
justable, allowing you to adjust the gap
between the Electrobrush and the floor.
Recommended use
Please note that the Electrobrush
should not be used to vacuum deep-
pile rugs and carpets or valuable
hand-knotted rugs and carpets, e.g.,
Persian and oriental rugs, etc. or long
piled rugs and carpets. There is a
risk of the threads being pulled out.
The Electrobrush is particularly suitable
for the intensive vacuuming of carpets
which are subject to hard wear.
The standard floorhead or one of the
Miele floorbrushes should be used for
cleaning hard floors.
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
How to use the Electrobrush
To achieve the best results, pass the
Electrobrush slowly backwards and
forwards over the carpet or floor.
For rugs with fringe, always draw the
Electrobrush from the middle of the rug
across the fringe towards the floor to
keep the fringe smooth.
Connecting the Electrobrush to the
vacuum cleaner
Connect the Electrobrush to the vac-
uum cleaner as illustrated.
- Stick vacuum cleaners:Fig. 01
- Vacuum Cleaners:Fig. 02 to Fig. 08
Adjusting the height(Fig. 09)
The Electrobrush has five settings for
adjusting the distance between the
Electrobrush and the floor. The display
shows the setting selected.
Setting 1 - closest to the floor
Setting 5 - furthest from the floor
Press the foot switch repeatedly until
the required setting is reached.
Switching on and off(Fig. 10)
Press the connection socket release
button to release the Electrobrush.
The Electrobrush will now switch on.
The Electrobrush will switch itself off if
you bring the connection socket back
up to its upright position during vacu-
uming.
On/Off switch on the handle
The electro hoses (SES) have an On/Off
switch on the handle which can be
used to switch the Electrobrush on and
off independently.
This means that you can switch the
Electrobrush off during vacuuming and
the vacuum cleaner will continue to op-
Loading ...
Loading ...
Loading ...