Loading ...
General
1 To switch on the appliance, turn the battery
compartment cover to the right until the
setting indicator points to the ‘on’ indication
(I) (Fig. 6).
2 Use the appliance as described in section
‘Precision trimming with precision trimming
comb’ and ‘Precision trimming without
precision trimming comb’.
3 To switch off the appliance, turn the battery
compartment cover to the left until the
setting indicator points to the ‘off’ indication
(0) (Fig. 7).
Precision trimming with precision
trimming comb
With the precision trimming comb, you can trim to
a length of 6mm.
Note: When you use the precision trimming head
for the rst time, always put the precision trimming
comb on the precision trimming head.
1 Push the precision trimming comb onto the
precision trimming head. (Fig. 8)
2 To trim most effectively, move the appliance
against the direction of hair growth. (Fig. 9)
Note: Make smooth and gentle movements and
make sure the surface of the precision trimmer comb
always stays in contact with the skin.
Precision trimming without precision
trimming comb
With the precision trimming head without comb,
you can trim to a length of 1mm, the so-called
‘stubble look’.
1 Pull the precision trimming comb off the
precision trimming head. (Fig. 10)
2 To trim most effectively, move the appliance
against the direction of hair growth, (Fig. 11)
Note: Make smooth and gentle movements and make
sure the surface of the precision trimmer always stays
in contact with the skin.
Cleaning
Clean the appliance immediately after use and
when a lot of hair or dirt has accumulated on the
cutting elements.
Caution: Do not immerse the motor unit in
water or any other liquid, nor rinse it under
the tap.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as
petrol or acetone to clean the appliance.
Do not tap on the cutting element.
Do not use any sharp objects to clean the cutting
element.
1 Make sure the appliance is switched off.
2 Detach the precision trimming head from
the motor unit to clean it. Turn the precision
trimming head to the right until the setting
indicator points to the ‘open’ indication
(black upward arrowhead). Then pull the
precision trimming head off the motor unit.
(Fig. 12)
3 Rinse the precision trimming head and the
precision trimming comb with lukewarm
water (Fig. 13)
4 Let all parts dry completely before you use
the appliance again.
5 To reattach the precision trimming head,
align the setting indicator with the ‘open’
indication (black upward arrowhead) and put
the precision trimming head on the motor
unit. Then turn the precision trimming head
to the left until the setting indicator points to
the ‘closed’ indication (I). (Fig. 14)
Replacement
If the comb is damaged or worn, always replace
it with an original Philips comb, which is available
from authorised Philips service centres.
If the cutting element of the precision trimming
head is damaged or worn, replace the precision
trimming head. You can obtain a new precision
trimming head from authorised Philips service
centres.
Environment
- Batteries contain substances that may pollute
the environment. Remove the battery when
it is empty or when you discard the appliance.
Do not throw away the battery with the
normal household waste, but hand it in at an
ofcial collection point (Fig. 15).
- Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve
the environment (Fig. 16).
Guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer
Care Centre in your country. You nd its phone
number in the worldwide guarantee leaet. If there
is no Consumer Care Centre in your country, go
to your local Philips dealer.
Guarantee restrictions
The guarantee becomes invalid when the appliance
is not used and/or not maintained properly or
when it is damaged by dropping.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the
appliance. If you are unable to solve the problem
with the information below, contact the Consumer
Care Centre in your country.
Problem Possible
cause
Solution
The
appliance
becomes
hot during
use.
The
cutting
element
is dirty.
Follow the instructions
in chapter ‘Cleaning’
to clean the
cutting element.
The
appliance
does not
work.
The
battery is
empty.
Replace the battery
with a new one (see
chapter ‘Preparing for
use’).
The
cutting
element
is dirty.
Follow the instructions
in chapter ‘Cleaning’
to clean the
cutting element.
FRANÇAIS (CANADA)
Introduction
Félicitations pour votre achat et bienvenue dans
l’univers Philips! Pour proter pleinement du
soutien de Philips, enregistrez votre produit à
l’adresse : www.philips.com/welcome.
Description générale (fig. 1)
1 Tête de tonte de précision
2 Bloc moteur
3 Couvercle du compartiment à pile
4 Peigne de coupe de précision
5 Pile jetable
Important
Lisez attentivement ce mode d’emploi avant
d’utiliser l’appareil et conservez-le pour un usage
ultérieur.
Mise en garde
- Cet appareil ne doit pas être utilisé par des
personnes (incluant des enfants) avec des
capacités physiques, sensorielles ou mentales
réduites, ou qui n’ont pas l’expérience et les
connaissances nécessaires, à moins qu’elles
ne soient sous la surveillance d’une personne
responsable de leur sécurité ou qu’elles
aient reçu de cette personne des directives
concernant l’utilisation de l’appareil.
- Les enfants doivent être surveillés pour
s’assurer qu’ils ne s’amusent pas avec l’appareil.
Avertissement
- Ne plongez jamais le bloc moteur dans de
l’eau, ni dans d’autres liquides et ne le rincez
pas sous le robinet.
- Cet appareil fonctionne uniquement avec une
pile.
- An d’éviter tout accident, n’utilisez pas
l’appareil si le bloc tondeuse de la tête de
tonte de précision, le peigne de coupe de
précision ou le bloc moteur est endommagé
ou cassé.
- Conservez l’appareil à une température entre
15 °C et 35 °C.
- Cet appareil a été conçu uniquement pour
tondre et travailler le style des poils du visage
et du cou. Ne l’utilisez jamais à d’autres ns.
- Si vous n’utilisez pas l’appareil pendant une
période prolongée, retirez la pile.
- Si l’appareil est soumis à un changement
important de température, de pression ou
d’humidité, laissez-le à la température ambiante
pendant 30 minutes avant de l’utiliser.
Loading ...