Loading ...
Loading ...
Loading ...
32
US
Basic Operations
Selecting the connected
component
You can use a VCR or other components
connected to the TV or VCR jacks on the rear
panel. Refer to the operation manual supplied
with the components for further information on
the operation.
Press FUNCTION +/– repeatedly until “TV”
or “VCR”appears in the front panel display.
Each time you press FUNCTION +/–, the mode
of the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
TV t VCR t AUDIO t …
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the TV or VCR jacks
on the rear of the unit or to the AUDIO IN jack
on the front panel. This is not a malfunction and
will depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
1 Press FUNCTION +/– repeatedly until
“TV,” “VCR,”or “AUDIO” appears in the
front panel display.
2 Press AMP MENU.
3 Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press or c.
4 Press X/x to select a setting.
• ATT ON: attenuates the input level. The
output level is changed.
• ATT OFF: normal input level.
5 Press .
The setting is reflected.
6 Press AMP MENU.
The AMP menu turns off.
Enjoying the Radio or
Other Components
AMP MENU
X/x/c,
FUNCTION
+/–
Loading ...
Loading ...
Loading ...