User Manual Bosch HBA5570S0B Serie 6 Built-in Oven

Model HBA5570S0B has a total connective load of 2.99kw. We do recommend hardwiring the appliance, however I can confirm that a B/S/H/ appliance under 3Kw can be fitted with a 13 amp plug, however, if the ring main is also supplying other appliances with a heater such as a kettle, a dishwasher, a washing machine etc then this may overload the circuit and trip the main fuse on the consumer unit so it is good practice to have this established at the design stage of an electrical or kitchen installation or have an electrician confirm the circuit is suitable.

This cannot sit directly on top of the warming drawer and will require an intermediate shelf in between.

We can confirm that a B/S/H/ appliance under 3Kw can be fitted with a 13 amp plug, however, if the ring main is also supplying other appliances with a heater such as a kettle, a dishwasher, a washing machine etc then this may overload the circuit and trip the main fuse on the consumer unit so it is good practice to have this established at the design stage of an electrical or kitchen installation or have an electrician confirm the circuit is suitable.
Wiring regulations do state that any cooking appliance over 2Kw should have its own dedicated supply back to the fuse board.

The pull-out rails are fixed in place and cannot be removed. The
clip-on pull-out rails can be fitted as required to levels that are not currently being used.

We cannot advise the exact amount of time the appliance will take to heat to this temperature. The appliance will display when the chosen temperature is met. If the appliance is taking an abnormally long time to heat, then we would advise to arrange an engineer inspection.