User Manual JBL Soundpoint Sp 8c Ii Twoway, 8" 200mm Inceiling Loudspeaker

JBL Soundpoint Sp 8c Ii Twoway, 8" 200mm Inceiling Loudspeaker - Use Manual - Use Guide PDF.
Documents: Go to donwload!
User Manual
  • Owner's manual - (English)
Other Documents
  • Spec Sheet English - (English)
  • JBL Passive Speaker Warranty Card - (English)
  • Product Brochures English - (English)
  • DIY Troubleshooting English - (English)

User manual of JBL SOUNDPOINT SP 8C II (8 pages)
file thumbnail

INCLUDED

Template/paint shield. Remove paint shield (inner rectangle) at perforation.

One pair of speakers with grilles.

Template/paint shield. Remove paint shield (inner circle) at perforation.

One pair of speakers with grilles (SP6CII and SP8CII).

Model SP6CSII includes only one loudspeaker. since it is capable of reproducing two channels of audio.

THANK YOU FOR CHOOSING JBL

400– 600

WALL

FRONT SPEAKERS

SPEAKER PLACEMENT

SP5II. SP6II. SP8II

SP6CII. SP6CSII. SP8CII

For more than 60 years. JBL has been involved in every aspect of music and film recording and reproduction. from live performances to monitoring the recordings you play in your home. car or office.

We’re confident that the JBL loudspeakers you have chosen will provide every note of enjoyment that you expected – and that when you think about purchasing additional audio equipment for your home. car or office. you will once again choose JBL.

Please take a moment to register your product on our Web site at www.jbl.com. It enables us to keep you posted on our latest advancements. and helps us to better under stand our customers and build products that meet their needs and expectations.

JBL. Incorporated

Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 2

WALL

5 – 6 ft.

WALL

MODELS SP5II. SP6II. SP8II AS REAR SPEAKERS

IN-CEILING MODELS SP6CII. SP6CSII. SP8CII

Proper placement of the speakers is an important step in obtaining the most realistic soundstage possible. These recommendations are for the optimum placement of the loud speakers. Use these placement recommendations as a guide.

Slight variations will not dimin ish your listening pleasure.

The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listener’s ears will be. with the tweeters aimed toward the listener at ear-level height.

In a home theater configuration. the two surround speakers should be placed slightly behind the listening position and ideally should face each other and be at a level higher than the lis tener’s ears. If that is not possi

MODEL SP6CSII Model SP6CSII has the capabil ity of playing two channels through one loudspeaker. thanks to its dual-tweeter/dual voice-coil construction. Since the tweeters are close together. in general they should be aimed away from each other for best coverage.

For two-channel (stereo) appli cations. e.g. as a single speaker in a remote room of a distrib uted audio system. install the SP6CSII speaker centrally in the ceiling for best stereo imaging. swiveling the tweeters so that one points toward the left and

Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 3

Phillips #2 screwdriver

Measuring tape Utility knife

Pencil

Carpenter’s level Awl

TOOLS NEEDED The SoundPoint Series in-wall speakers were designed to be easily installed. However. if you are unsure of your ability to prop erly install these loudspeakers. please contact your dealer or a qualified installer.

INSTALLATION

The wires for both speakers should be the same length. If one speaker is placed closer to the amplifier than the other. hide the excess wire behind the wall. Speakers and elec tronics terminals have corre sponding (+) and (–) terminals.

Most manufacturers of speakers and electronics. including JBL. use red to denote the (+) termi nal and black for the (–) termi nal. It is important to connect both speakers identically: (+) on the speaker to (+) on the ampli fier and (–) on the speaker to (–) on the amplifier. Wiring “out of phase” results in thin sound. weak bass and a poor stereo image. With the advent of multi channel surround sound systems. connecting all of the speakers in your system with

CONNECTION TIPS

WIRE LENGTH RECOMMENDED SIZE

Up to 20 ft.

16-gauge Up to 30 ft.

12-gauge Greater than 30 ft.

10-gauge

SPEAKER CONNECTIONS

† For model SP6CSII. the terminals for both the left and right channels will be on the same loudspeaker.

Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 4

SP5II. SP6II. SP8II

EXISTING CONSTRUCTION

Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing. to avoid scratching the grille or baffle you may unfold a paper clip. insert the straight end through one of the holes in the grille. and gently pull up.

Determine the correct speaker location.

Note: Remove the inner template. which is the paint shield. at the perforation. Use the outer tem plate when cutting the drywall.

Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.

≥1/2"

≥1/2"

Cut the drywall.

Connect the speaker wires to the speaker.

Replace the metal grille.

Place the frame assembly in the wall.

Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.

The SoundPoint speakers fea ture unique swivel mounts for the tweeters that enable you to aim the very directional high frequencies toward the listening position. at ear-level height. Before installing the speaker grille. gently press on the outer edge of the tweeter mount to adjust the position of the tweeter. The tweeter will not swivel more than 15 degrees in any direction; do not attempt to force it to move further. You may also rotate the tweeter to orient the JBL logo as desired.

Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 5

SP6CII. SP6CSII. SP8CII

EXISTING CONSTRUCTION

Remove the grille from the speaker frame by pulling on the paper tab. If the tab is missing. to avoid scratching the grille or baffle you may unfold a paper clip. insert the straight end through one of the holes in the grille. and gently pull up.

≥1/2"

≥1/2"

≥1/2"

Cut the drywall.

Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.

Connect the speaker wires to the speaker. Model SP6CSII requires two sets of speaker wires. one for each channel.

Place the frame assembly in the wall.

Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.

Replace the metal grille.

Determine the correct speaker location.

Note: Remove the inner template. which is the paint shield. at the perforation. Use the outer tem plate when cutting the drywall.

The SoundPoint speakers fea ture unique swivel mounts for the tweeters that enable you to aim the very directional high frequencies toward the listening position. at ear-level height. Before installing the speaker grille. gently press on the outer edge of the tweeter mount to adjust the position of the tweeter. The tweeter will not swivel more than 15 degrees in any direction; do not attempt to force it to move further. You may also rotate

Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 6

NEW CONSTRUCTION

PAINTING THE SPEAKER FRAME AND GRILLE

SoundPoint Series loud speakers can be painted to match any décor. If you wish to change their color. the satin finish on the grille and frame will function as a primer coat.

Before painting. install the paint shield (inner section of template in the assembly kit) securely into the recess in the

Note: Gently remove the acoustical foam blanket from the grille before painting.

Reattach the blanket after the paint has dried.

You will need to purchase the correct rough-in frame kit for your model:

SPEAKER MODEL ROUGH-IN FRAME KIT

SP5II RIF5 SP6II RIF6 SP6CII RIF6C SP6CSII RIF6CS SP8II RIF8 SP8CII RIF8C

Detailed installation instructions are supplied with the rough-in kit.

TROUBLESHOOTING

IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS:

• Check that receiver/amplifier is on and a source is playing.

• Check all wires and connec tions between receiver/ampli fier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed. cut. punctured or touching each other.

• Review proper operation of your receiver/amplifier.

IF THERE IS NO SOUND COMING FROM ONE SPEAKER:

• Check the “Balance” control on your receiver/amplifier.

• Check all wires and connec tions between receiver/ampli fier and speakers. Make sure all wires are connected. Make

IF THERE IS LOW (OR NO) BASS OUTPUT:

• Make sure the connections to the left and right “Speaker Inputs” have the correct polar ity (+ and –).

• Consider adding a powered subwoofer to your system.

• In Dolby Digital or DTS modes. make sure your receiver/ processor is correctly config ured. When using a subwoofer. make sure the subwoofer output of the receiver/ proces sor has been enabled. If no subwoofer is being used. make sure the left and right front and rear speakers have been configured as “LARGE.” See your receiver/processor’s

IF THE SYSTEM PLAYS AT LOW VOLUMES BUT SHUTS OFF AS VOLUME IS INCREASED:

• Check all wires and connec tions between receiver/ampli fier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed. cut. punctured or touching each other.

• If more than one pair of main speakers is being used. check the minimum-impedance requirements of your receiver/amplifier.

Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 7

Declaration of Conformity

We. Harman Consumer Group International 2. route de Tours 72500 Château du Loir France

EN 61000-6-3:2001 EN 61000-6-1:2001 Laurent Rault Harman Consumer Group International Château du Loir. France 7/06

SP5II SP6II SP6CII SP6CSII SP8II SP8CII

Frequency Response

Hz– 20kHz (–10dB) Hz – 20kHz (–10dB) Hz– 20kHz (–10dB) Hz – 20kHz (–10dB)

Recommended Maximum Amplifier Power †

60 watts 80 watts 100 watts total (50WPC) 100 watts

Impedance

8 ohms nominal 8 ohms nominal per input 8 ohms nominal

Sensitivity

87dB (2.83V/1m) 88dB (2.83V/1m) 88dB (2.83V/1m). both channels driven 89dB (2.83V/1m)

Crossover Frequency

3.000Hz 2.800Hz 2.600Hz 2.400Hz

Woofer

5-1/4" titanium-laminate 6-1/2" titanium-laminate 8" titanium-laminate cone w/rubber surround

Tweeter Tweeters Tweeter

1"titanium-laminate Dual 3/4" 1"titanium-laminate 1"titanium dome. w/Elliptical Oblate titanium-laminate dome. w/Elliptical Oblate laminate Spheroidalwaveguide dome. domes.

Spheroidalwaveguide dome. and swivel mount w/swivel mount w/swivel mounts and swivel mount w/swivel mount

Plate Size (W x H) Plate Size (Diameter) Plate Size (W x H) Plate Size (Diameter)

7-1/2" x 10" (191mm x 254mm) 8-1/2" x 11" (216mm x 279mm) 9-3/16" (233mm) 10-1/8" x 13-1/8" (257mm x 333mm) 10-7/8" (275mm)

Mounting Cutout Size (W x H) Mounting Cutout Size (Dia.) Mounting Cutout Size (W x H) Mounting Cutout Size (Dia.)

6-1/8" x 8-11/16" (156mm x 221mm) 7-1/8" x 9-11/16" (181mm x 246mm) 7-7/8" (200mm) 7-7/8" (200mm) 8-7/8" x 11-13/16" (225mm x 300mm) 9-1/2" (240mm)

Mounting Depth

3-3/4" (95mm) 3-7/8" (98mm) 4-1/4" (108mm) 4" (102mm) 4-1/4" (108mm)

Weight per Speaker

4 lb (1.8kg) 5 lb (2.3kg) 4.5 lb (2.0kg) 4 lb (1.8kg) 7.8 lb (3.5kg) 5.6 lb (2.5kg)

SPECIFICATIONS

All features and specifications are subject to change without notice.

† The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recom mend sustained operation at these maximum power levels.

Dolby is a registered trademark of Dolby Laboratories.

DTS is a registered trademark of DTS. Inc.

DESIGN GOAL: Combine the superior performance of traditional JBL loudspeakers with the convenience of in-wall installation.

TWEETER TYPE: Titanium-laminate-dome with swivel mount

WOOFER TYPE: Titanium-laminate cone with rubber surround

CROSSOVER NETWORK: Straight-Line Signal Path (SSP)

PROFESSIONAL REFERENCE: Studio Monitor

OWNER’S GUIDE

P R O D U C T L I N E :

M O D E L S : SP5II. SP6II. SP6CII. SP6CSII. SP8II. SP8CII

SOUNDPOINT ® SERIES

+2006 Harman International Industries. Incorporated. All rights reserved.

JBL. Harman International and SoundPoint are registered trademarks of Harman International Industries. Incorporated.

Part Nos.406-000-05268-E. 170-0091 7/06

PRO SOUND COMES HOME

JBL. Incorporated 250 Crossways Park Drive. Woodbury. NY 11797 8500 Balboa Boulevard. Northridge. CA 91329 516.255.4JBL (4525) www.jbl.com

NOTE: For new-construction applications. be sure to purchase the correct rough-in frame kit.

Soundpoint OM SP5-6-6C-8-8 7/7/06 9:36 AM Page 2



Newest Added: ON TIME 400IHD UA TRUE WIRELESS STREAK BAR 2.1 ES90 SCS 140

Tags: JBL Audio Use Manual, Jbl Tune 510 Bt, Jbl Streak, Jbl Tune 510bt Manual, Jbl Horizon 2 Manual, Jbl Tune 510bt User Manual, Jbl 510 Bt Manual

JBL SOUNDPOINT SP 8C II | Pages: 8 | Created on: 2006-07-07 | File type: PDF | Filename: 55722320_soundpoint-sp-8c-ii.pdf | Size: 298.26 KB | Language: English | Other documents: 4 files.

Download User Manual

Product Infomation and Reviews - SOUNDPOINT SP 8C II photo

SOUNDPOINT SP 8C II Photo

T: @manualsFile

https://manualsFile.com

JBL SOUNDPOINT SP 8C II Questions and Answers


JBL

JBL

Owner manual PDF of JBL Soundpoint Sp 8c Ii Twoway, 8" 200mm Inceiling Loudspeaker.

Use manuals file type: PDF. JBL - Audio