LG Electronics 49VL5F-A 49” 3.5mm Narrow Bezel Video Wall with 450 nit Brightness, FHD, IPS, Gap Reduction & easy controls

User Manual - Page 83

For 49VL5F-A.

PDF File Manual, 92 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ENGLISH
53
51. [Local Key Operation Lock] (Command: t o)
Configures the local key operation settings of the product.
Transmission
(t)(o)( )(Set ID)( )(Data)(Cr)
Data 00: Unlocks all keys
01: Locks all keys except Power key
02: Locks all keys
Acknowledgment
(o)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
52. Status Check (Command: s v)
Checks the current signal of the product.
Transmission
(s)(v)( )(Set ID)( )(Data)( )(FF)(Cr)
Data 02: Check whether there is a signal
10: RGB Sensor OK/NG(Check Screen)
Acknowledgment
(v)( )(Set ID)( )(OK/NG)(Data)(Data1)(x)
Data 02 (when a signal is found)
Data1 00: No signal
01: Signal present
Data 10 (Check Screen)
Data1 00: Check Screen result NG
07: Check Screen result OK
* When Check Screen is set to Off or not supported, execution results
are rendered "NG."
53. [Screen Fault Detection] (Command: t z)
Sets the Screen Fault Detection feature.
Transmission
(t)(z)( )(Set ID)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgment
(z)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
54. [PM Mode] (Command: s n, 0c)
Sets the PM mode.
Transmission
(s)(n)( )(Set ID)( )(0c)( )(Data)(Cr)
Data 00: [Power Off]
01: [Sustain Aspect Ratio]
02: [Screen Off]
03: [Screen Off Always]
04: [Screen Off & Backlight On]
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(0c)(Data)(x)
* This feature may not be available for all models.
55. [Screen Off Always] (Command: j p)
If you activate the Screen Off Always feature, the monitor
enters Screen Off mode regardless of whether or not you have
activated PM mode.
Transmission
(j)(p)( )(Set ID)( )(Data)(Cr)
Data 00: On (Screen on)
01: Off (Screen off)
* This feature may not be available for all models.
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(0d)(Data)(x)
56. [Auto Config.] (Command: j u)
Automatically corrects the position and shaking of the picture.
(Works only in RGB-PC input mode.)
Transmission
(j)(u)( )(Set ID)( )(Data)(Cr)
Data 01: Execute
Acknowledgment
(u)( )(Set ID)( )(OK/NG)(Data)(x)
Loading ...
Loading ...
Loading ...