Loading ...
Loading ...
Loading ...
Page 6
DC input power
When powering your portable freezer with a standard 12 V socket, the unit will
not work if socket has a voltage of less than 10.4 V. The unit will restart when the
voltage is 11.8V or greater.
When powering your portable freezer into a standard 24 V socket, the unit will
not work if the socket has a voltage of less than 22.5 V. The unit will restart when
the voltage is 24.2 V or greater.
Your portable freezer uses a digital control system for adjusting the thermostat.
1. SET:
Temperature setting:
Press the set button once to set desired temperature of the Small zone.
Press the set button twice to set desired temperature of the Large zone.
Battery cut-out voltage setting:
This function sets the minimum voltage that the unit will run. Press the SET
button 3 times to set the Battery cut-out voltage. To select different cut-out
voltage (10V/ 10.7V/ 11.8V), press the +/- buttons.
2. +: Button for increasing the temperature setting.
3. -: Button for decreasing the temperature setting.
4. ECO button: Press the ECO button to set the unit in ECO mode. For use when
the unit will not be accessed for an extended period of time. The unit maintains
the internal temperature up to a 2F degree variation to conserve energy.
ECO light: Indicates when the ECO mode is on.
5. RUN light: When the RUN light is green, it indicates the unit is running.
6. Battery display: Shows battery condition in DC power supply only.
*When battery level is too low, the battery display will flash.
OPERATING YOUR PORTABLE FREEZER
Test-Run
UNDERSTANDING THE TEMPERATURE CONTROL SETTING
Loading ...
Loading ...
Loading ...