Loading ...
Loading ...
Loading ...
English 7
STEP 4:
Adjust working pressure and water vol-
ume by turning the Remote Pressure
Control either direction.
Always return the control to the high-
est setting before shutting the pressure
washer off.
STEP 5:
Check oil level. Insert and remove dipstick
without screwing it into the fi ller neck.
Check the oil level shown on the dipstick.
Be sure the machine is level when check-
ing the oil level. (Refer to the engines
operating manual for seasonal grades).
We recommend that the oil be changed
after the fi rst 5 hours of use, then once
every 50 hours.
STEP 6:
Fill gas tank with unleaded gasoline.
Do not use leaded gasoline.
Do not add oil to the gasoline.
STEP 7:
Pull back the spring loaded collar at the
high pressure outlet and insert the high
pressure hose
FULL / MAX
ADD / MIN
OPERATING INSTRUCTIONS
STEP 1:
Pull the spring-loaded collar of the wand
back to insert your choice of quick connect
nozzle.
Release the collar and push the nozzle
until the collar clicks.
CAUTION
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
■ Make sure you hear a "click" when insert-
ing the nozzle tip into the wand.
■ Pull the nozzle to make sure it is seated
properly before operating your unit.
STEP 2:
Pull back the spring loaded collar at the
spray gun and insert the high pressure
hose.
STEP 3:
Release the collar and push the nozzle
until the collar clicks.
Loading ...
Loading ...
Loading ...