Loading ...
Loading ...
Loading ...
11
Reverse Doors (optional)
IMPORTANT: If you want to reverse your door so it opens from
the opposite side, follow these steps. If you are not reversing the
door, see “Replace Door(s) and Hinges.”
Cabinet
1. Remove hinge screws from handle side and move them to
opposite side.
A. 5/16" Hex-Head Hinge Screws
Refrigerator door
1. Remove the refrigerator handle assembly. See “Remove and
Replace Door Handles.” Keep all parts together.
2. Remove door handle seal screw front. Move to opposite side
of refrigerator door as shown below.
3. Remove the door stop. Move it to the opposite side of the
refrigerator door as shown below.
A. Door Stop Screws B. Door Stop
4. Attach refrigerator handle on opposite side of the refrigerator
door with the two screws. Replace handle trim. See “Remove
and Replace Door Handles.”
5. Tighten all screws. Set aside the door until hinges and freezer
compartment drawer are in place.
Freezer door
1. Remove the freezer handle assembly. See “Remove and
Replace Door Handles.” Keep all parts together.
2. Remove door stop. Move to opposite side of freezer door as
shown below.
A. Door Stop Screws B. Door Stop
3. Attach handle to opposite side of freezer door.
4. Tighten all screws. Set the door aside.
5. Remove the base grille by grasping the grille firmly with both
hands and pulling it toward you.
NOTE: Place a shim under the bottom front edge of the
refrigerator cabinet to take the weight off the roller brackets.
6. Remove the screws from both roller brackets as shown below.
7. Remove the hinge plate located behind the roller bracket and
move it to the opposite side of the refrigerator. Move the hinge
pin and shim to the outside hole on the hinge plate as shown
below.
A. Hinge Pin Shim D. Roller Bracket
B. Bottom Hinge E. 3/8" Hex-Head Hinge Screws
C. Hinge Plate
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
Standard Door - Freezer drawer models
1. Replace the parts for the bottom hinge as shown below.
Tighten screws.
A. Hinge Pin Cover C. Hinge Screws
B. Bottom Hinge
Loading ...
Loading ...
Loading ...