Loading ...
Loading ...
Loading ...
9
Problem Possible cause Solution
The light of the
Calc-Clean
button ashes
and the
appliance beeps
every time I press
the steam trigger.
No steam comes
out of the
soleplate.
You have not done or
have not completed
the Calc-Clean
process.
Perform the Calc-Clean process to
enable the steam function again
(see chapter ‘IMPORTANT - Cleaning
and maintenance’).
The appliance
has switched o.
The safety auto-o
function was activated.
This happens
automatically when
the steam generator
has not been used for
more than 5 minutes.
Set the on/o switch to ‘o’ position
and then to ‘on’ position.
The appliance
produces a loud
pumping sound.
The water tank is
empty.
Fill the water tank with water and
press the steam trigger until the
pumping sound becomes softer and
steam comes out of the soleplate.
Water droplets
come out of the
soleplate.
After the Calc-Clean
process, remaining
water may drip out of
the soleplate.
Wipe the soleplate dry with a piece
of cloth. If the light in the Calc-Clean
button still ashes and the appliance
still beeps, perform the Calc-Clean
process (see chapter ‘IMPORTANT
- Cleaning and maintenance’).
The Calc-Clean
process has not been
completed.
You have to perform the Calc-Clean
process again (see chapter
‘IMPORTANT - Cleaning and
maintenance’).
Dirty water and
impurities come
out of the
soleplate.
Impurities or chemicals
present in the water
have deposited in the
steam vents and/or
soleplate.
Perform the Calc-Clean process
regularly (see chapter ‘IMPORTANT
- Cleaning and maintenance’).
Water ushes out
of the soleplate.
You have accidentally
started the Calc-Clean
process (see chapter
‘IMPORTANT -
Cleaning and
maintenance’).
Switch o the appliance. Then switch
it back on again. Let the iron heat up
until the ‘iron ready’ light lights up
steadily.
ENGLISH
Loading ...
Loading ...
Loading ...