Loading ...
Loading ...
Loading ...
Cleaning and servicing en
35
6. Place the To-Go blade insert on
the base unit and rotate in a clock-
wise direction until it locks into
place.
→Fig.
16
7. Set the rotary switch to the recom-
mended speed.
→Fig.
17
Tip:Processing can also take
place with instantaneous switching.
→"Using instantaneous switching",
Page34
8. Process the ingredients until you
achieve the required result.
9. To end the operation, set the rotary
switch to .
→Fig.
18
Closing the To-Go blender jug
Requirement:The appliance has
stopped.
1. Turn the To-Go blender jug anti-
clockwise and remove it from the
base unit.
→Fig.
19
2. Turn the To-Go blender jug and un-
screw the To-Go blade insert.
→Fig.
19
3. Close the mouthpiece on the lid.
→Fig.
20
4. Screw the lid and the To-Go
blender jug in tightly.
→Fig.
20
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Dishwasher-safe components
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
Only put dishwasher-safe parts in
the dishwasher.
Only use programmes that do not
heat the water above 60°C.
Do not wedge plastic parts in the
dishwasher.
This overview describes the cleaning
process for the components.
→Fig.
21
Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
taining alcohol or spirits.
Do not use sharp, pointed or metal
objects.
Do not use abrasive cloths or
cleaning agents.
Cleaning the base unit
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
Never immerse the appliance or
the power cord in water or clean in
the dishwasher.
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
Wipe down the base unit with a
soft, damp cloth.
Loading ...
Loading ...
Loading ...