Loading ...
Loading ...
Loading ...
6
• Do not use the spice mill and the herb chopper for liquid preparations
(fruit juice, etc.)
• These accessories come with a bowl (D3, E2) which prevents access to
the blades during use.
1. Turn the bowl (D3, E2) upside down and add the ingredients.
2. Correctly position the seal (D2) on the blade (C1) (Fig. 5).
Clip the blade (D1 or E1) to the blade support (C1) (Fig. 6).
Place the blade assembly (C1, D1 or C1, E2) on the bowl (D3 or E2)
and lock it by turning the blade clockwise (Fig. 7).
3. Turn over the assembled accessory (D or E) and position it on the
motor unit. The open lock is aligned with the arrow on the bowl
(Fig. 8 - position 1).
4. Then turn the assembled accessory (D or E) a quarter turn, anti-
clockwise, until the closed lock is aligned with the arrow on the
bowl (Fig. 8 - position 2).
5. Connect the appliance and turn the speed selector (B) to the desired
position or pulse a few times. Hold the bowl (D3, E2) when the
appliance is in operation. To turn off the appliance, turn the speed
selector (B) to put it back to position “0”.
6. Unlock the accessory by turning it a quarter turn, anti-clockwise, until
the closed lock is aligned with the arrow of the bowl. Remove the
assembled accessory (D, E) from the motor unit.
Put it to the worktop before unlocking the blade (D1, E1) from
the bowl (D3, E2) by reversing the order of assembly. The blades
are very sharp: handle very carefully to avoid injury. You can then
remove the preparation in the bowl.
* The colour of the bowl can change after the mixing of certain very
hard ingredients (cloves, cinnamon, etc.).
Loading ...
Loading ...
Loading ...