Home
Bookmarks
Home
Bosch
Bosch SHV88PZ53N User Manual
Page 2
Bosch SHV88PZ53N Benchmark® Dishwasher 24''
User Manual - Page 2
For SHV88PZ53N.
PDF File Manual
,
58 pages
,
Read Online
|
Download pdf file
More photos
Table of contents
en-us Operating instructions
( Safety Definitions 5
( IMPORTANT SAFETY INSTRUCTIONS 6
ƒ Causes of Damage 10
* Getting Started 11
+ Water softening system / special salt 14
, Rinse Aid 16
- Loading the Dishwasher 18
. Detergent 30
/ Dishwasher Cycles 32
0 Dishwasher Cycle Options 33
1 Operating the Dishwasher 36
2 Care and Maintenance 41
3 Troubleshooting 46
4 Customer Service 53
‡ Statement of Limited Product Warranty 54
( Safety Definitions
Safety Definitions
9 WARNING
9 CAUTION
NOTICE
Note:
( IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
To reduce the risk of fire, electrical shock, or serious injury, observe the following:
Risk of fire, electrical shock, or serious injury
9 WARNING
Risk of injury or death!
9 WARNING
Risk of injury!
9 WARNING
Risk of electrical shock or fire!
9 WARNING
RIsk of explosion!
9 WARNING
Health hazard!
GROUNDING INSTRUCTIONS
9 WARNING
Risk of electric shock!
Safe Operation
9 CAUTION
9 WARNING
Risk of injury!
9 WARNING
CHILD SAFETY!
Proper Care and Maintenance
Note:
NOTICE
Proposition 65 Warning:
ƒ Causes of Damage
Causes of Damage
NOTICES
* Getting Started
Getting Started
Appliance overview
Operating panel
Note:
Dishwasher interior components
Display indicators
Menu overview
Setting
Factory setting
Description
+ Water softening system / special salt
Water softening system / special salt
Instructions for use of included “Water Hardness Test Strip”
1. Run the water at the kitchen sink for 5 minutes.
2. Dip the end of the test strip with the colored squares into the tap water for 1 second and shake off excess water.
3. After one minute, compare the test strip to the chart below and determine the Dishwasher Water Softener setting.
4. Adjust the dishwasher Water Softener setting. ~ "Adjusting the water softening system" on page 15
5. If required, add salt to the dishwasher salt chamber as shown. ~ "Using special dishwasher salt" on page 15
Adjusting the water softener settings
Using the test strip included with your dishwasher (Purchased test strips may have a different scale)
Water softener setting
Add salt to salt dispenser
Water hardness conversion chart (only necessary if you purchase a different test strip)
ppm
gpg/°dH
Adjusting the water softening system
Set the softening system as follows:
1. Ask your local water utility company for the water hardness value of your tap water or use test strip.
2. Required setting can be found in the water hardness table.
3. Press On/Off button (.
4. Hold down function key # and press Start button P until the display 8 indicates •:‹x (x can be any number).
5. Release both buttons. The indicator of function key # flashes and the display 8 indicates •:‹‹. Press function key 3 to select the desired setting.
6. Press Start button P to save the setting.
Using special dishwasher salt
NOTICE
Top off the salt as follows:
1. Undo the screw plug on the dispenser 1b.
2. Fill the dispenser with water (required only when switching on the appliance for the first time).
3. Add salt as illustrated (do not use table salt, salt tablets or salt for use with whole house water softeners).
Using detergents with salt component
Detergent with a salt component
Switching off low salt indicator / water softening system
Switching off water softening system
, Rinse Aid
Rinse Aid
Note:
Adding rinse aid
NOTICE
1. Open the rinse aid dispenser 92 by pressing on the latch of the lid and pull it open.
2. Add liquid rinse aid to the dispenser 92 until it is full. Do not overfill. Avoid spilling into air vent hole.
3. Close the lid. Lid must be fully closed until it clicks in order to seal.
4. Wipe up any excess rinse aid that may have puddled when the dispenser reservoir is full.
Tip:
NOTICE
Setting the amount of rinse aid used
Setting
Amount
1. Press the On/Off button (.
2. Hold down the function key # and press the Start button P until the display 8 indicates •:‹x or š:‹x (x can be any number). Release both buttons.
3. Press the function key # until the display 8 shows §:‹†.
4. Press the function key 3 to select the desired setting.
5. Press the Start button P to save the setting.
Turning off rinse aid indicator
NOTICE
- Loading the Dishwasher
Loading the Dishwasher
Dishware material
Note:
Recommended
Not Recommended
Loading the racks
For best dishwashing results, observe the following when loading the dishwasher:
NOTICE
Loading the upper rack
Note:
Loading the lower rack
Loading the third level rack
Loading patterns for lower rack
12 place setting suggested loading pattern
Alternate loading pattern
Alternate loading pattern with pots and pans
Loading patterns for upper rack
12 place setting suggested loading with My Way Rack™ *
Alternate loading pattern
Alternate loading pattern with stemware
Loading patterns for third rack
Suggested loading pattern for My Way Rack™
Loading the silverware basket
9 WARNING
Risk of injury!
The Double Flex silverware basket
Side by side
Back to back
Note:
Suggested loading patterns
Recommended loading pattern
12 place setting
Additional loading pattern
10 place setting
Unloading the dishwasher
9 CAUTION
Note:
Adjusting the height of the rack
With silverware basket
Upper rack
Lower rack
9.4 in (24 cm)
12.6 in (32 cm)
10.4 in (26.5 cm)
11.8 in (30 cm)
11.4 in (29 cm)
10.6 in (27 cm)
With third rack
Upper rack
Lower rack
7 in (18 cm)
12.6 in (32 cm)
8 in (20.5 cm)
11.8 in (30 cm)
9 in (23 cm)
10.6 in (27 cm)
RackMatic®
1. Pull the upper rack out of the dishwasher until it stops.
2. To lower the rack, push the RackMatic® lever inward.
3. To raise the rack, hold the basket on the sides of the upper rack and lift it up.
Note:
Rack accessories
Flip tines
My Way Rack™
Cup shelves
Extra tall item sprinkler*
Note:
NOTICE
Removing/Installing third rack
Removing third rack 1*
1. Pull out third rack all the way (1).
2. Lift upper rollers over the stopper hooks of both rails (2).
3. Pull third rack out forward and upward so that the holding hooks and the lower rollers of the rack slide over the stopper hooks of both rails (3).
Installing third rack 1*
1. Pull out third rack rails all the way (1).
2. Insert third rack at an angle. Make sure that the stopper hooks of both rails slide in between the holding hooks and the lower rollers of the third rack (2).
3. Slide third rack in and lift the upper rollers over the front stopper hooks of both rails (3).
4. Push in third rack (4).
Removing/Installing upper rack with Rackmatic®
Removing upper rack 12
1. Pull out upper rack all the way (1).
2. Lift front rollers over the stopper hook of the rail (2).
3. Pull out upper rack forwards and upwards so that the upper and lower rollers of the rack slide over the stopper hooks of both rails (3).
Installing upper rack 12
1. Pull out upper rack rails all the way (1).
2. Insert upper rack at an angle. Make sure that the stopper hooks of both rails slide in between the upper and lower rollers on the rear side of the rack (2).
3. Slide upper rack in and lift the upper rollers over the front stopper hooks of both rails (3).
4. Push in upper rack (4).
. Detergent
Detergent
NOTICE
Note:
Wash Cycle
Hard Water/ Heavy Soil
Medium Water/ Medium Soil
Soft Water/ Little Soil
Adding detergent
1. If the detergent dispenser 9: is still closed, push the button 9B to open it.
Note:
2. When using detergent tabs, lay them such that they do not come in contact with the cover, insert a detergent tab flat, not on its side.
Note:
3. Close the lid by placing the finger on the lid as shown. Slide the lid closed until it clicks.
Tip:
/ Dishwasher Cycles
Dishwasher Cycles
Wash cycle
Recommended use
Possible wash cycle option
Note:
Note:
The Energy Guide label was based on the Normal soil sensing cycle as follows: The unit was tested without any rinse aid (liquid) in the rinse aid dispenser 92. A single dose of detergent was inserted into the detergent dispenser 9:, with no detergent...
0 Dishwasher Cycle Options
Dishwasher Cycle Options
Delay
Half Load
Delicate
Sanitize
CrystalDry™
ExtraScrub®
Wash Cycle Information
Note:
Only sanitizing cycles have been designed to meet the requirements of Section 6 of the NSF/ANSI Standard for Residential Equipment for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, to imply that all cyc...
1 Operating the Dishwasher
Operating the Dishwasher
Note:
9 WARNING
Risk of injury!
Protection against unintentional operation
This function will be activated when:
Note:
Operating the touch buttons
AquaSensor
Switching the appliance on
1. Turn the water supply on fully.
2. Open the door.
3. Press the On/Off button (.
4. Press Start button P.
Note:
Time display
Delay Start
To set Delay start:
1. Open the door and press the On/Off button (. Select a cycle.
2. Press the Delay button from the wash cycle options H until the displayed time corresponds with your requirements.
3. Press the Start button P to activate Delay start.
To cancel Delay start:
1. Open the door and press the Delay button until œ:‹‹ is indicated on the digital display 8.
2. Press the Start button P to save setting.
Note:
Wash cycle end
To change the signal volume:
1. Open the door.
2. Press the On/Off button (.
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
4. Release both buttons. The LED for function key # flashes and the digital display shows the factory setting.
5. Press function key # until the display shows ›:‹ƒ.
6. Press function key 3. Each time the button is pressed the set value increases by one level; when it reaches the value ›:‹„, the display jumps back to ›:‹‹ (off).
7. Press Start button P to save the setting.
Auto power off
To change the setting:
1. Open the door.
2. Press On/Off button (.
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
4. Release both buttons. The indicator of function key # flashes and the display 8 shows the factory set value.
5. Press function key # until the display 8 indicates ˜:‹x.
6. Press function key 3 until the display corresponds with your requirements.
7. Press Start button P.
Switching off the appliance
Short time after the end of the wash cycle:
1. Open the door.
2. Switch off On/Off button (.
3. Turn off water supply.
4. Remove the utensils when they have cooled down.
9 WARNING
Risk of injury!
Interrupting the wash cycle
9 CAUTION
1. Open the door.
2. Switch off On/Off switch (.
3. To continue the wash cycle, switch on the On/Off switch ( again.
4. Close the door.
Note:
Cancel a cycle (Reset)
1. Open the door and press and hold Start button P for approximately 3 seconds until the display reads ‹:‹‚, then close door again.
2. Wait about 1 minute while the dishwasher drains.
3. Open the door and press the On/Off button (.
Changing the wash cycle
Intensive drying
To change the setting:
1. Open the door.
2. Press On/Off button (.
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
4. Release both buttons. The indicator of function key # flashes and the display 8 shows the factory set value.
5. Press function key # until the display 8 shows the factory set value š:‹‹.
6. Press function key 3 to switch the feature on š:‹‚ or off š:‹‹.
7. Press Start button P to save setting.
InfoLight® *
To change the setting:
1. Open the door.
2. Press the On/Off button (.
3. Hold down function key # and press Start button P until the display 8 indicates •:‹x (x can be any number).
4. Release both buttons. The indicator of function key # flashes and the display 8 indicates the factory set value •:‹…
5. Press the function key 3 to switch the InfoLight® feature on ‚:‹‚ or off ‚:‹‹.
6. Press Start button P to save the setting.
TimeLight® (Optical display while the wash cycle is running) *
All time remaining displays
To change the setting:
1. Open the door.
2. Press On/Off button (.
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
4. Release both buttons. The light above function key # flashes and the display 8 shows the factory set value.
5. Press function key # until the display 8 shows the factory set value †:‹‚.
6. Press function key 3 to switch between †:‹‹ and †:‹‚.
7. Press Start button P to save setting.
2 Care and Maintenance
Care and Maintenance
Cleaning the dishwasher
NOTICE
9 WARNING
RIsk of explosion!
9 WARNING
Filters
Filter components
The filter system 1j consists of three parts.
Cleaning intervals
Your filter system may need to be cleaned when:
Cleaning interval
Usage
Note:
To check or clean the filter system:
1. Unscrew the Large Object Trap as illustrated and remove the entire filter system.
2. Remove the microfilter from the fine filter for easier cleaning.
3. Rinse the filters under running water and use a soft brush to clean.
Note:
4. Reinstall the filter system in reverse sequence and lock into place by screwing the Large Object Trap until the marking arrows align.
Spray arms
Check spray arms 1:, 1Z for grease and limescale deposits. If you find such deposits:
Drain pump
Large food remnants in the rinsing water not retained by the filters may block the waste water pump. In this case:
Note:
Preparing your unit for vacation
NOTICE
Winterizing your unit
NOTICE
3 Troubleshooting
Troubleshooting
Problem
Cause
Action
Note:
Note:
Note:
--------
4 Customer Service
Customer Service
1. Call us at 1-800-944-2904
2. Contact Customer Service from our web site: www.bosch-home.com/us or www.bosch-home.ca
3. Contact your installer or the Bosch Authorized Service Contractor in your area.
4. Write us:
‡ Statement of Limited Product Warranty
Statement of Limited Product Warranty
What this Warranty Covers & Who it Applies to:
How Long the Warranty Lasts
Extended Limited Warranty
BSH also provides these additional limited warranties:
Repair/Replace as Your Exclusive Remedy
Out of Warranty Product
Warranty Exclusions
Obtaining Warranty Service:
Page 2/58
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
Page 51
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
Page 58
Contents
Table of Contents
Search
Previous
Next
Troubleshooting
Bookmarks
Loading ...
2
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 5435620_shv88pz53n.pdf
File size: 5.14 MB
File Language: English
Pages: 58
Author: Bosch
File created: 2020-07-10
Published:
2021-04-11
Updated: 2023-06-03
Download File
Table of Contents
×
Table of contents
3
en-us Operating instructions
3
( Safety Definitions 5
3
( IMPORTANT SAFETY INSTRUCTIONS 6
3
ƒ Causes of Damage 10
3
* Getting Started 11
3
+ Water softening system / special salt 14
3
, Rinse Aid 16
3
- Loading the Dishwasher 18
3
. Detergent 30
3
/ Dishwasher Cycles 32
3
0 Dishwasher Cycle Options 33
3
1 Operating the Dishwasher 36
3
2 Care and Maintenance 41
3
3 Troubleshooting 46
3
4 Customer Service 53
3
‡ Statement of Limited Product Warranty 54
3
( Safety Definitions
5
Safety Definitions
5
9 WARNING
5
9 CAUTION
5
NOTICE
5
Note:
5
( IMPORTANT SAFETY INSTRUCTIONS
6
IMPORTANT SAFETY INSTRUCTIONS
6
READ AND SAVE THESE INSTRUCTIONS
6
To reduce the risk of fire, electrical shock, or serious injury, observe the following:
6
Risk of fire, electrical shock, or serious injury
6
9 WARNING
6
Risk of injury or death!
6
9 WARNING
6
Risk of injury!
6
9 WARNING
6
Risk of electrical shock or fire!
6
9 WARNING
6
RIsk of explosion!
6
9 WARNING
7
Health hazard!
7
GROUNDING INSTRUCTIONS
7
9 WARNING
7
Risk of electric shock!
7
Safe Operation
8
9 CAUTION
8
9 WARNING
8
Risk of injury!
8
9 WARNING
8
CHILD SAFETY!
8
Proper Care and Maintenance
8
Note:
9
NOTICE
9
Proposition 65 Warning:
9
ƒ Causes of Damage
10
Causes of Damage
10
NOTICES
10
* Getting Started
11
Getting Started
11
Appliance overview
11
Operating panel
12
Note:
12
Dishwasher interior components
12
Display indicators
12
Menu overview
13
Setting
13
Factory setting
13
Description
13
+ Water softening system / special salt
14
Water softening system / special salt
14
Instructions for use of included “Water Hardness Test Strip”
14
1. Run the water at the kitchen sink for 5 minutes.
14
2. Dip the end of the test strip with the colored squares into the tap water for 1 second and shake off excess water.
14
3. After one minute, compare the test strip to the chart below and determine the Dishwasher Water Softener setting.
14
4. Adjust the dishwasher Water Softener setting. ~ "Adjusting the water softening system" on page 15
14
5. If required, add salt to the dishwasher salt chamber as shown. ~ "Using special dishwasher salt" on page 15
14
Adjusting the water softener settings
14
Using the test strip included with your dishwasher (Purchased test strips may have a different scale)
14
Water softener setting
14
Add salt to salt dispenser
14
Water hardness conversion chart (only necessary if you purchase a different test strip)
14
ppm
14
gpg/°dH
14
Adjusting the water softening system
15
Set the softening system as follows:
15
1. Ask your local water utility company for the water hardness value of your tap water or use test strip.
15
2. Required setting can be found in the water hardness table.
15
3. Press On/Off button (.
15
4. Hold down function key # and press Start button P until the display 8 indicates •:‹x (x can be any number).
15
5. Release both buttons. The indicator of function key # flashes and the display 8 indicates •:‹‹. Press function key 3 to select the desired setting.
15
6. Press Start button P to save the setting.
15
Using special dishwasher salt
15
NOTICE
15
Top off the salt as follows:
15
1. Undo the screw plug on the dispenser 1b.
15
2. Fill the dispenser with water (required only when switching on the appliance for the first time).
15
3. Add salt as illustrated (do not use table salt, salt tablets or salt for use with whole house water softeners).
15
Using detergents with salt component
15
Detergent with a salt component
15
Switching off low salt indicator / water softening system
15
Switching off water softening system
15
, Rinse Aid
16
Rinse Aid
16
Note:
16
Adding rinse aid
16
NOTICE
16
1. Open the rinse aid dispenser 92 by pressing on the latch of the lid and pull it open.
16
2. Add liquid rinse aid to the dispenser 92 until it is full. Do not overfill. Avoid spilling into air vent hole.
16
3. Close the lid. Lid must be fully closed until it clicks in order to seal.
16
4. Wipe up any excess rinse aid that may have puddled when the dispenser reservoir is full.
16
Tip:
16
NOTICE
16
Setting the amount of rinse aid used
17
Setting
17
Amount
17
1. Press the On/Off button (.
17
2. Hold down the function key # and press the Start button P until the display 8 indicates •:‹x or š:‹x (x can be any number). Release both buttons.
17
3. Press the function key # until the display 8 shows §:‹†.
17
4. Press the function key 3 to select the desired setting.
17
5. Press the Start button P to save the setting.
17
Turning off rinse aid indicator
17
NOTICE
17
- Loading the Dishwasher
18
Loading the Dishwasher
18
Dishware material
18
Note:
18
Recommended
18
Not Recommended
18
Loading the racks
19
For best dishwashing results, observe the following when loading the dishwasher:
19
NOTICE
19
Loading the upper rack
19
Note:
19
Loading the lower rack
19
Loading the third level rack
19
Loading patterns for lower rack
20
12 place setting suggested loading pattern
20
Alternate loading pattern
20
Alternate loading pattern with pots and pans
20
Loading patterns for upper rack
20
12 place setting suggested loading with My Way Rack™ *
20
Alternate loading pattern
21
Alternate loading pattern with stemware
21
Loading patterns for third rack
21
Suggested loading pattern for My Way Rack™
21
Loading the silverware basket
22
9 WARNING
22
Risk of injury!
22
The Double Flex silverware basket
22
Side by side
22
Back to back
22
Note:
22
Suggested loading patterns
23
Recommended loading pattern
23
12 place setting
23
Additional loading pattern
24
10 place setting
24
Unloading the dishwasher
24
9 CAUTION
24
Note:
24
Adjusting the height of the rack
24
With silverware basket
24
Upper rack
24
Lower rack
24
9.4 in (24 cm)
24
12.6 in (32 cm)
24
10.4 in (26.5 cm)
24
11.8 in (30 cm)
24
11.4 in (29 cm)
24
10.6 in (27 cm)
24
With third rack
24
Upper rack
24
Lower rack
24
7 in (18 cm)
24
12.6 in (32 cm)
24
8 in (20.5 cm)
24
11.8 in (30 cm)
24
9 in (23 cm)
24
10.6 in (27 cm)
24
RackMatic®
25
1. Pull the upper rack out of the dishwasher until it stops.
25
2. To lower the rack, push the RackMatic® lever inward.
25
3. To raise the rack, hold the basket on the sides of the upper rack and lift it up.
25
Note:
25
Rack accessories
25
Flip tines
25
My Way Rack™
26
Cup shelves
26
Extra tall item sprinkler*
26
Note:
27
NOTICE
27
Removing/Installing third rack
27
Removing third rack 1*
27
1. Pull out third rack all the way (1).
27
2. Lift upper rollers over the stopper hooks of both rails (2).
27
3. Pull third rack out forward and upward so that the holding hooks and the lower rollers of the rack slide over the stopper hooks of both rails (3).
27
Installing third rack 1*
28
1. Pull out third rack rails all the way (1).
28
2. Insert third rack at an angle. Make sure that the stopper hooks of both rails slide in between the holding hooks and the lower rollers of the third rack (2).
28
3. Slide third rack in and lift the upper rollers over the front stopper hooks of both rails (3).
28
4. Push in third rack (4).
28
Removing/Installing upper rack with Rackmatic®
28
Removing upper rack 12
28
1. Pull out upper rack all the way (1).
28
2. Lift front rollers over the stopper hook of the rail (2).
28
3. Pull out upper rack forwards and upwards so that the upper and lower rollers of the rack slide over the stopper hooks of both rails (3).
28
Installing upper rack 12
29
1. Pull out upper rack rails all the way (1).
29
2. Insert upper rack at an angle. Make sure that the stopper hooks of both rails slide in between the upper and lower rollers on the rear side of the rack (2).
29
3. Slide upper rack in and lift the upper rollers over the front stopper hooks of both rails (3).
29
4. Push in upper rack (4).
29
. Detergent
30
Detergent
30
NOTICE
30
Note:
30
Wash Cycle
30
Hard Water/ Heavy Soil
30
Medium Water/ Medium Soil
30
Soft Water/ Little Soil
30
Adding detergent
31
1. If the detergent dispenser 9: is still closed, push the button 9B to open it.
31
Note:
31
2. When using detergent tabs, lay them such that they do not come in contact with the cover, insert a detergent tab flat, not on its side.
31
Note:
31
3. Close the lid by placing the finger on the lid as shown. Slide the lid closed until it clicks.
31
Tip:
31
/ Dishwasher Cycles
32
Dishwasher Cycles
32
Wash cycle
32
Recommended use
32
Possible wash cycle option
32
Note:
32
Note:
32
The Energy Guide label was based on the Normal soil sensing cycle as follows: The unit was tested without any rinse aid (liquid) in the rinse aid dispenser 92. A single dose of detergent was inserted into the detergent dispenser 9:, with no detergent...
32
0 Dishwasher Cycle Options
33
Dishwasher Cycle Options
33
Delay
33
Half Load
33
Delicate
33
Sanitize
33
CrystalDry™
33
ExtraScrub®
33
Wash Cycle Information
34
Note:
35
Only sanitizing cycles have been designed to meet the requirements of Section 6 of the NSF/ANSI Standard for Residential Equipment for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, to imply that all cyc...
35
1 Operating the Dishwasher
36
Operating the Dishwasher
36
Note:
36
9 WARNING
36
Risk of injury!
36
Protection against unintentional operation
36
This function will be activated when:
36
Note:
36
Operating the touch buttons
36
AquaSensor
36
Switching the appliance on
36
1. Turn the water supply on fully.
36
2. Open the door.
36
3. Press the On/Off button (.
36
4. Press Start button P.
36
Note:
37
Time display
37
Delay Start
37
To set Delay start:
37
1. Open the door and press the On/Off button (. Select a cycle.
37
2. Press the Delay button from the wash cycle options H until the displayed time corresponds with your requirements.
37
3. Press the Start button P to activate Delay start.
37
To cancel Delay start:
37
1. Open the door and press the Delay button until œ:‹‹ is indicated on the digital display 8.
37
2. Press the Start button P to save setting.
37
Note:
37
Wash cycle end
37
To change the signal volume:
37
1. Open the door.
37
2. Press the On/Off button (.
37
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
37
4. Release both buttons. The LED for function key # flashes and the digital display shows the factory setting.
37
5. Press function key # until the display shows ›:‹ƒ.
37
6. Press function key 3. Each time the button is pressed the set value increases by one level; when it reaches the value ›:‹„, the display jumps back to ›:‹‹ (off).
37
7. Press Start button P to save the setting.
37
Auto power off
38
To change the setting:
38
1. Open the door.
38
2. Press On/Off button (.
38
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
38
4. Release both buttons. The indicator of function key # flashes and the display 8 shows the factory set value.
38
5. Press function key # until the display 8 indicates ˜:‹x.
38
6. Press function key 3 until the display corresponds with your requirements.
38
7. Press Start button P.
38
Switching off the appliance
38
Short time after the end of the wash cycle:
38
1. Open the door.
38
2. Switch off On/Off button (.
38
3. Turn off water supply.
38
4. Remove the utensils when they have cooled down.
38
9 WARNING
38
Risk of injury!
38
Interrupting the wash cycle
38
9 CAUTION
38
1. Open the door.
38
2. Switch off On/Off switch (.
38
3. To continue the wash cycle, switch on the On/Off switch ( again.
38
4. Close the door.
38
Note:
39
Cancel a cycle (Reset)
39
1. Open the door and press and hold Start button P for approximately 3 seconds until the display reads ‹:‹‚, then close door again.
39
2. Wait about 1 minute while the dishwasher drains.
39
3. Open the door and press the On/Off button (.
39
Changing the wash cycle
39
Intensive drying
39
To change the setting:
39
1. Open the door.
39
2. Press On/Off button (.
39
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
39
4. Release both buttons. The indicator of function key # flashes and the display 8 shows the factory set value.
39
5. Press function key # until the display 8 shows the factory set value š:‹‹.
39
6. Press function key 3 to switch the feature on š:‹‚ or off š:‹‹.
39
7. Press Start button P to save setting.
39
InfoLight® *
39
To change the setting:
39
1. Open the door.
39
2. Press the On/Off button (.
39
3. Hold down function key # and press Start button P until the display 8 indicates •:‹x (x can be any number).
39
4. Release both buttons. The indicator of function key # flashes and the display 8 indicates the factory set value •:‹…
39
5. Press the function key 3 to switch the InfoLight® feature on ‚:‹‚ or off ‚:‹‹.
39
6. Press Start button P to save the setting.
39
TimeLight® (Optical display while the wash cycle is running) *
40
All time remaining displays
40
To change the setting:
40
1. Open the door.
40
2. Press On/Off button (.
40
3. Hold down function key # and press Start button P until the display 8 shows •:‹x or š:‹x (x can be any number).
40
4. Release both buttons. The light above function key # flashes and the display 8 shows the factory set value.
40
5. Press function key # until the display 8 shows the factory set value †:‹‚.
40
6. Press function key 3 to switch between †:‹‹ and †:‹‚.
40
7. Press Start button P to save setting.
40
2 Care and Maintenance
41
Care and Maintenance
41
Cleaning the dishwasher
41
NOTICE
41
9 WARNING
41
RIsk of explosion!
41
9 WARNING
41
Filters
42
Filter components
42
The filter system 1j consists of three parts.
42
Cleaning intervals
42
Your filter system may need to be cleaned when:
42
Cleaning interval
42
Usage
42
Note:
42
To check or clean the filter system:
43
1. Unscrew the Large Object Trap as illustrated and remove the entire filter system.
43
2. Remove the microfilter from the fine filter for easier cleaning.
43
3. Rinse the filters under running water and use a soft brush to clean.
43
Note:
43
4. Reinstall the filter system in reverse sequence and lock into place by screwing the Large Object Trap until the marking arrows align.
43
Spray arms
43
Check spray arms 1:, 1Z for grease and limescale deposits. If you find such deposits:
43
Drain pump
44
Large food remnants in the rinsing water not retained by the filters may block the waste water pump. In this case:
44
Note:
44
Preparing your unit for vacation
45
NOTICE
45
Winterizing your unit
45
NOTICE
45
3 Troubleshooting
46
Troubleshooting
46
Problem
46
Cause
46
Action
46
Note:
49
Note:
49
Note:
52
--------
52
4 Customer Service
53
Customer Service
53
1. Call us at 1-800-944-2904
53
2. Contact Customer Service from our web site: www.bosch-home.com/us or www.bosch-home.ca
53
3. Contact your installer or the Bosch Authorized Service Contractor in your area.
53
4. Write us:
53
‡ Statement of Limited Product Warranty
54
Statement of Limited Product Warranty
54
What this Warranty Covers & Who it Applies to:
54
How Long the Warranty Lasts
54
Extended Limited Warranty
54
BSH also provides these additional limited warranties:
54
Repair/Replace as Your Exclusive Remedy
55
Out of Warranty Product
55
Warranty Exclusions
55
Obtaining Warranty Service:
57
Search:
×
Search
