Loading ...
Loading ...
Loading ...
12
en After using the appliance/cleaning
Insert tools into the receptacle and
switch on the appliance at the required
level.
Level 1, 2:
For working in and mixing in.
Level 3, 4, 5:
For kneading and beating.
After working, set the switch to P
and release and remove the tools with
the ejector button.
Caution:
The ejector button cannot be actuated
unless the switch is in the P position.
Note: Always switch off the base unit before
taking it out of the blended food.
High-speed hand blender
(depending on the model)
For blending mayonnaise, sauces, soups,
mixed drinks, baby food and for crushing
ice and cutting cooked fruit and vegetables.
Important note: When the rear aperture is
open, the appliance can be operated using
instantaneous switching only. Selector
switch 1-5 will not function. Open and close
the lock on the rear aperture only when
the switch is in position P.
X Fig. C
Push up the lock on the rear aperture
until it locks into position.
Insert the high-speed hand blender and
lock into position.
Put the food in the blender jug.
Move the switch to the left to
instantaneous switching and hold
in place.
After working, remove the high-speed
hand blender by simultaneously
pressing both release buttons.
Close the lock on the rear aperture.
Note: To prevent the food from splashing,
first immerse the high-speed hand blender
into the food, then switch on the appliance.
After using the appliance/
cleaning
Important note: The appliance is main-
tenance-free. Thorough cleaning protects
the appliance from damage and keeps it
functional.
Caution!
Never immerse the base unit in water and
do not clean in the dishwasher. Do not
steam-clean the appliance!
Pull out the mains plug.
Wipe the base unit with a damp cloth
and then wipe dry.
Clean the tools and high-speed hand
blender in the dishwasher or with
a brush under running water.
Note: when processing food such as red
cabbage, the plastic parts may become
discoloured, however this can be removed
with a few drops of cooking oil.
The power cord can be wound up to facili-
tate storage of the appliance (see Fig. D
Troubleshooting
Fault:
Switch cannot be moved to Levels 1 to 5.
Remedy:
When the rear aperture is open, the selec-
tor switch will not function between Levels 1
and 5. The lock must be completely closed.
Loading ...
Loading ...
Loading ...