Loading ...
Loading ...
Loading ...
English14
Installation instructions
Installation instructions
Install support platform in cabinet
Provide a platform (100 lb. load capacity) within the cabinet to support the unit. The
platform must be installed level and straight. The platform must be flush with the
cutout at the front of the cabinet. (See the graphic.) There is no way to level the
warming drawer after installation. 3/4” (1.9 cm) thick plywood is recommended.
NOTE
If the unit is not installed level , the drawer may slide open on its own or may not
seal tightly, causing inefficient performance.
Securing the Warming drawer to the cabinet
1.
Insert the unit in the cutout until the back
of the faceplate stops at the cleats.
2.
Keeping the chassis centered side to side,
attach inner cabinet side screws starting
with mounting hole #1 through mounting
Hole #7. (See the graphic below.)
3.
Re-install the warming drawer.
Loading ...
Loading ...
Loading ...