Loading ...
Loading ...
Loading ...
4.3 Reversing the door
If necessary, you can change the way the door opens:
Ensure that the following tools are available:
q
Torx® 25 (T25)
q
Torx® 15 (T15)
q
Slotted screwdriver
q
Open-ended wrench SW10
q
Spirit level
q
Open-ended wrench supplied with the T25 tool
q
If necessary, a cordless screwdriver
q
Get a stepladder if necessary
q
If necessary, a second person for assembly
4.3.1 Removing the top door
Note
u
Remove any food from the door racks before removing the
door, so that no food falls out.
Fig. 8
u
Open the door.
NOTICE
Risk of damage!
If the door seal is damaged, the door may fail to close properly
and the cooling will be inadequate.
u
Do not damage the door seal with the screwdriver!
u
Remove the outer cover.
Fig. 8 (1)
u
Disengage and release the bearing bracket cover. Remove
the bearing bracket cover.
Fig. 8 (2)
u
Unlatch the panel with a slotted screwdriver and swivel it to
one side.
Fig. 8 (3)
Fig. 9
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Carefully remove the protective cover.
Fig. 9 (1)
u
Undo the bolt a little with a T15 screwdriver.
Fig. 9 (2)
u
Hold the door and remove the bolts with your fingers.
Fig. 9 (3)
u
Pull the bearing bush out of the guide. Insert from the other
side and click into place.
Fig. 9 (4)
u
Lift the door and set it aside.
u
Carefully lift the plugs out of the door bearing bush with a
slotted screwdriver and remove.
Fig. 9 (5)
Putting into operation
8 * Depending on model and options
Loading ...
Loading ...
Loading ...