Loading ...
Loading ...
Loading ...
9
• Dice all the ingredients before putting them into the mixer jug (C). It is best to start with
liquids, without going over the maximum level shown on the jug (1.5L).
• Connect the appliance and start up by turning speed selector (E) to "Pulse," "1," or "2".
• To stop the appliance, bring the speed selector (E) to "0".
• Wait for the appliance back to a complete stop before removing the mixer jug (C).
• Remove the mixer jug (C) by unlocking it in opposite direction to installation.
2. Universal Mill:
• This universal mill (F) is equipped with a bowl (f3) that
prevents access to the blades during use.
• Rotate the bowl (F) and pour the ingredients.
• Position the sealing gasket (f1) in its recess on the mill
blade unit (f2) (figure 2). Position the mill blade unit
(f2) on the bowl (f3), and lock the universal mill by
rotating the blade unit (f2) through a turn in the
clockwise direction (figure 3).
• Rotate the assembled universal mill (F) and position it
on the motor unit (D). The lock (open) is aligned
in the slot on the motor unit (D) (figure 4).
• Rotate the assembled universal mill (F) though a turn
anticlockwise until the lock (closed) appears (figure 4).
• Connect the appliance and start up by turning speed
selector (E) to "Pulse," "1," or "2".
• To stop the appliance, bring the speed selector (E) to "0".
• Wait for the appliance back to a complete stop before
removing the universal mill (C).
• Remove the universal mill (F) by unlocking it in opposite
direction to installation.
• Turn it over on the worktop before unlocking the mill
blade unit (f2) from the bowl (f3) in the reverse order
of the assembly. The blades are very sharp: handle
them with caution to avoid injury. You can then collect
the preparation in the bowl.
Remark: The colour of the bowl may change after
blending certain very hard ingredients: cloves, cinnamon,
etc…
Caution: leaks can occur
if the accessory is not
locked correctly.
Loading ...
Loading ...
Loading ...