Loading ...
Loading ...
Loading ...
5. Through the back opening, pull out the two prong
connecter from the pump and light wiring harness
and connect it to the transformer.
6. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing. Make
sure the water completely submerges the pump
and the water runs clear during operation.
NOTE: We recommend that you use distilled water
to prevent scale build-up. It can take up to 5 minutes for
the air to be completely expelled and water begins to flow
the first time you operate the pump.
7. Plug the transformer into a local power supply.
Make sure that there is no water around the plug &
always keep the power source in a dry place.
8. Now adjust the water pump to your flow
preference. (see Quick Tip #1) Once set, install the
Back Door Cover by sliding it into the designated
opening.
6
Alpine Quick Tip #3
Make sure your pump
and light cords are
tucked neatly into the
cord slot.
7
Alpine Quick Tip #2
Double check all
connecter to make
sure they are tight.
Loading ...
Loading ...