If necessary, level the turntable by
adjusting the feet.
Put the counterweight in place.
Put a record on the platter.
Balance the tonearm so it stays level by
turning the counterweight forwards and
backwards on the rod.
Debut Carbon EVO
Setup Guide
Carefully remove the protection covering.
Turn the whole counterweight counter-
clockwise until the scale reads 18 - 20.
19
Put the loop of the Anti Skating Weight in
the second groove on the tonearm post.
Turn the front dial of the counterweight
(not the whole weight) so the ‘0’ is in line
with marker at the back of the tonearm.
Remove the needle protection cover.
Place the tonearm between platter
and armrest.
Unpack Dust Cover and put it on the
turntable.
Connect to your hi-system and enjoy
your music!
Tonearm is fragile!
Getting started:
• Make sure to have enough space to unpack your turntable.
• Always unpack and setup in a clean enviroment.
• Please Do NOT throw away the packaging! If you need a
service or want to return your product, please send them in
the original packaging including all inserts. In case of any
damage in another packaging your dealer cannot guaran-
tee a full refund.
• complete manual:
www.project-audio.com/en/product/debut-carbon-evo
1 32
5
6
4
7
8 10 11
13
15
16
14
17
20
18
a) Anti Skating Weight
b) Adapter for 7“ singles
c) Connect it E RCA cable
d) Round belt for 78 RPM
e) Standard at belt for 33/45 RPM
a) b) c)
d)
e)
Unpack all items from accessory bag.
Remove dust cover carton from the box.
Lift the wrapped turntable out of the box.
Unpack the counterweight.
Unpack the power supply.
Unpack the platter.
9
Put the drive belt on the pulley
and sub-platter.
Use the rocker switch to select the
playback speed.
Remove tonearm twist tie.
12
0°
21
22
Lower the tonearm with the lift.
Large pulley for round belt (78 RPM)
Put the platter on the turntable.
LEFT: 33 RPM RIGHT: 45 RPM / 78 RPM
STOPS THE MOTOR
The turntable should always be placed on
a at surface. Check with a spirit level.
Balance the tonearm so it stays level by
turning the counterweight forwards and
backwards on the rod.
0°
>
23
Loading ...
