Loading ...
How to Use
Trimming Beards
n Before you begin, comb your
hair in the direction that it grows
so that the hairs are at their
maximum height and facing in the
same direction.
n Determine how much hair you
want to cut and position the
hair length selector accordingly.
Remember, until you are familiar
with using the trimmer, it’s always
better to select a longer hair
setting initially in order not to trim
too much hair.
n Turn the unit’s power switch to ON,
and begin trimming.
n When finished trimming, turn the
unit’s power switch to OFF.
To Trim the Beard’s Hair
Length
n Trimmer guard attachment is on.
n Turn the trimmer so the front of the
cutting unit (“Zoom Wheel” side) is
facing away from you.
n Start trimming under your chin
and, following your jawbone
line, work toward your ear and
upper beard line using an upward
motion. Allow the hair length
selector attachment to follow
the contours of your face. You
may trim either against or with
the direction of beard growth,
whichever is preferred.
To Define the Beard Line
n Remove trimmer
guard attachment.
n Hold trimmer
vertically with cutting
blades facing you.
n Start with edge of
beard line. With
the cutting blades resting lightly
against your skin, use motions
towards edge of beard line to trim
it to desired location in facial area
and away from beard in neck area.
To Thin and Taper the Beard
n Trimmer guard
attachment is off.
n Use the unit’s styling
comb or a small
comb and hold the
beard hairs in place
while trimming.
n Holding the trimmer horizontally
with the cutting unit facing away
from you, move the trimmer along
the length of the comb.
Creating the “Stubble Look”
n Trimmer guard
attachment should
be on and set to
position 1 (1.5 mm)
or 2 (2.5 mm).
n Hold trimmer
horizontally with the
cutting unit facing
either up or down.
n Trim hairs using
an upward or
downward motion
against or with the
direction of hair
growth, whichever is preferred.
n For an even closer “stubble
look,” remove the hair length
selector attachment and repeat
the previous two steps. However,
caution must be taken not to
remove too much hair, creating a
“blotchy” look.
7
5
3
7
7
Cleaning & Maintenance
Cleaning and Maintaining
Your Trimmer
Your trimmer is fitted with high-quality hardened steel or ceramic cutting blades.
Cleaning should only be done with a soft brush, such as the brush supplied with
the unit.
Clean your trimmer regularly to ensure that the unit’s operating life is not prema-
turely shortened.
n Unplug adapter from wall outlet
n Do not apply pressure or hard objects to the cutters.
n Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on the
unit’s main body.
Weekly
Trimmer should always be shut off. Remove trimmer
guard attachment from trimmer. Shake or blow out any
accumulated hairs.
Main trimmer
1. Flip the blades open by pushing upward on the cutter teeth. The
cutter assembly will swing up and the underside of the cutter
assembly will be accessible.
2. Blow out any loose hair that has accumulated. Brush out any
remaining hair from the cutter teeth and hair pocket with the
brush provided. Do not rinse the cutter assembly under water or
use cleaning fluids which could remove the lubrication.
Troubleshooting
The trimmer does not work when turned on:
n Trimmer must be charged for a full 14-16 hours.
Trimmer cutters do not move:
n The cutting unit may be dirty and clogged. Clean the unit as directed in
Cleaning & Maintenance section.
Trimmer does not hold charge:
n Fully discharge battery by running trimmer until it stops; then follow recharging
instructions (see section on To Charge/Recharge).
Without trimmer guard
attachment
n Remove trimmer guard attachment.
n Place a finger on upper lip only to
lift hair up, away from skin.
n Trim hairs using an
upward motion.
n After achieving
desired length, use a
downward motion to
blend mustache hairs.
NOTE: Use slow and
light pressure. Too much pressure
may trim off more hair than desired.
n Turn trimmer off.
To trim sideburns
n Comb sideburns following the
direction of your hair growth.
n Be certain trimmer guard
attachment is ON.
n Hold trimmer vertically with front
of trimmer facing you.
n Trim sideburns using a
downward motion.
n Turn trimmer OFF.
Trimming the Nape of Your Neck
n You will need a hand mirror for this operation if performing it alone. The mirror is
not necessary if trimming is performed by a second person.
n Remove the hair length selector attachment.
n Use your fingers to lift the hair at the base of your head up off the neck. Your
index finger should be covering the roots of the hairs you are lifting to prevent
accidental removal by trimmer.
n Using your other hand, hold the trimmer horizontally to the
base of your neck with the cutting unit facing up, and move the
trimmer along the length of the neck until the unit touches your
finger covering the hair roots at the base of your head. Repeat
this procedure for the entire area of the neck. Be sure to move
the unit slowly when performing this operation and to keep the
hair roots at the base of your head out of the way of the trimmer.
n Use the hand mirror to inspect the results of the operation and
ensure all hairs along the nape of the neck have been trimmed.
Performance Guarantee
Limited Two-Year Warranty
Spectrum Brands, Inc. is a global consumer products company with a diverse
portfolio of world-class brands, including Remington-branded electric shavers.
Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a two-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Remington Returns Center, 507 Stokely
Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648 in
the US or 800-268-0425 in Canada.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
n Accident, misuse, abuse or alteration of the product
n Servicing by unauthorized persons
n Use with unauthorized accessories
n Connecting it to incorrect current and voltage
n Wrapping cord around appliance causing premature wear & breakage
n Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
Battery Removal
When your rechargeable groomer reaches the end of its useful life, the batter-
ies must be removed from the groomer and recycled or disposed of properly in
accordance with your local and state requirements.
The following procedure should be followed for battery removal:
1. Make sure your groomer is unplugged from any outlets so you don’t risk an
electric shock.
2. Remove side panels/grips
3. Remove the 4 housing screws
4. Pull or gently pry the clipper halves apart, exposing the batteries.
5. Remove batteries from the unit.
6. Twist batteries to break wires. Wires may also be cut.
CAUTION: THESE NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR
DISPOSED OF IN ACCORDANCE WITH STATE AND LOCAL REGULATIONS. Do
not burn or mutilate, as they may burst or release toxic materials. Do not short-
circuit, as this may cause burns.
Spectrum Brands, Inc. is voluntary participating in an industry
program to collect and recycle nickel-cadmium (Ni-Cd) batter-
ies at the end of their useful life, when taken out of service in
the United States or Canada. The EPA-certified RBRC
®
program
provides a convenient alternative to placing used Ni-Cd batteries
into the trash or the municipal waste stream, which may be ille-
gal in your area. Please call 1-800-8-BATTERY
SM
for information
on Ni-Cd battery recycling and disposal bans/restriction in your
area. Spectrum Brands, Inc. involvement in this program is part
of our commitment to preserving our environment and conserving
our natural resources.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indi-
cating purchase price and date of purchase to the retailer from whom it was
purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the
product within 30 days from the date of purchase. If you have any questions
concerning the money-back guarantee, please call 800-736-4648 in the US or
800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington
® Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
® branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call 800-
736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded Men’s Shave and Groom
product:
a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240 Vac, 50/60 Hz
Questions or comments:
Call 800-736-4648 in the US or
800-268-0425 in Canada, or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc.,
Middleton, WI 53562
Dist. by:
Spectrum Brands Canada Inc.,
131 Saramia Crescent
Vaughan, ON L4K 4P7
® Registered Trademark of Spectrum Brands, Inc.
©2014 Spectrum Brands, Inc.
11/14 10084-01
Made in China
T22-28582
Contains a listed adaptor.