Loading ...
Loading ...
Loading ...
3
Safety Instructions
Electrical Requirements
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical
shock by providing an escape wire for the electrical current.
This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or serviceman if the grounding instructions are not completely
understood or if doubt exists as to whether the appliance is properly grounded.
Electrical Connection
• There is no power on the exterior control panel of the Marshall Fridge. The switches do not light up; the knobs and
jacks are aesthetic only.
• Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal
safety, this appliance must be properly grounded.
• The MF-110-XMC model requires a 110 Volt AC. The MF-220-XMC model requires a 220 Volt AC. Have the wall outlet
and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong
wall outlet is encountered, it is customer’s responsibility and obligation to have it replaced with a properly grounded
3-prong wall outlet. For voltage and outlet style please refer to our website www.marshallfridge.com.
• The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury.
• Never unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle.
Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that
shows cracks or abrasion damage along its length or at either end.
• When moving the unit, be careful not to damage the power cord.
WARNING
DANGER
CAUTION
70
Loading ...
Loading ...
Loading ...