Loading ...
Loading ...
Loading ...
6
After unpacking and before using the steamer for
the fi rst time, you might notice some water around
the water supply tank. That is residual water left
over after the factory inspection and is normal.
1. Place the appliance on a fl at, level and solid
surface during use.
2. Pull the water supply tank out of the unit. Turn
and open the water supply cover and fi ll the water
supply tank with water (use only distilled water or
purifi ed water) and close the water supply cover.
The steam lasts for about 8~10 minutes.
3. Push the water supply tank into the main unit until it is fl at with the main unit.
Water is supplied to the main unit and the water level in the water tank decreases after the
water supply tank is attached to the main unit.
Preparation before use
Use only distilled water or purifi ed water.
Since the service life of the appliance may shorten depending on water quality, the
use of distilled water or purifi ed water is recommended.
The following types of water cannot be used due to its high mineral content.
Tap water, Mineral water, Geothermal water, Acidulated water, Ionized alkaline water.
Do not mix with anything
Do not mix the water with any other substance, such as lotion, aromatic oil, etc,
otherwise, it may cause burns, malfunctions, or shorten the life of the main unit
Loading ...
Loading ...
Loading ...