Loading ...
Loading ...
Loading ...
5. Next place the supplied Sponge under the Pump.
This will help the Pump from excess vibration in
the Fountain Base.
6. Place the Fountain Tray onto the Fountain Base,
and route the light cord through the Hole in the
Tray then into the Base. Next Route both the
Pump and Light cords through the hole in the back
of the Fountain.
7. Pull out the light cord plug through the back
opening & connect to the transformer.
8. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing. Make
sure the water completely submerges the pump
and the water runs clear during operation.
NOTE: We recommend that you use distilled water
to prevent scale build-up. The first time you operate the
pump it can take up to 5 minutes for the air to be
completely expelled and water begins to flow properly
6
7
Loading ...
Loading ...