Loading ...
Loading ...
Loading ...
29-6144
Installation Instructions
REVERSING THE DOOR SWING
IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all the way through before start-
ing.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for the doors.
IMPORTANT: Once you begin, do not move the cabi-
net until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side—if you ever want to
change the hinges back to the right side, follow these
same instructions and reverse all references to left and
right.
Unplug the refrigerator from its electrical outlet.
NOTE: Do not let either door drop to the floor. To do so
could damage the door stop.
CAUTION
Lifting Hazard. The Fresh Food
and Freezer doors are heavy Use
both hands to secure the doors before lifting.
TOOLS YOU WILL NEED
Phillips screwdriver
Allen wrench (Stainless
Steel Handle Models)
Masking tape
5/16" socket and ratchet
REMOVE FREEZER DOOR
1. Remove all food from the inner door liner..
2. Tape the door shut with masking tape.
3. Remove the hinge cover on top of the freezer door
with a thin-blade screwdriver.
1
REMOVE FREEZER DOOR (CONT.)
1
4. Remove the three screws with a 5/16? socket
and ratchet, then lift the hinge straight up to free
the hinge pin from the socket in the top of the
door.
5. Remove the tape and tilt the door away from the
cabinet. Lift it off the center hinge pin.
6. Transfer plastic bushing from right side of top of
freezer door to the left side.
7. Remove the hole covers with a putty knife on
the opposite side of the three hinges.
8. Set the door on a non-scratching surface with
the inside up.
Hole Cover
Bottom Hinge
Hole Covers
Center Hinge
Hole Covers
Top Hinge
12
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...