Loading ...
Loading ...
Loading ...
10
3 Press / repeatedly to select hour
format.
4 Press CLOCK SETtoconrm.
» The hour digits blink.
5 Repeat steps 3-4 to set the hour.
6 Repeat steps 3-4 to set the minute.
7 Repeat steps 3-4 to select whether to
synchronize time of this unit with RDS
stations.
• [RDS TIME SYNC [N] ]: time
synchronization is deactivated.
• [RDS TIME SYNC [Y] ]: the unit
synchronizes time from the RDS
stations automatically.
Note
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
• If no button is pressed in 90 seconds, the unit exits
clock setting mode automatically.
Turn on
Press .
» The unit switches to the last selected
source.
Note
•
To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
Switch to standby mode
Press again to switch the unit to standby
mode.
» Theclock(ifset)appearsonthe
display panel.
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before connecting the AC adapter, ensure that you have
completed all other connections.
Note
•
The type plate is located at the back of the main unit.
Connect the power adapter to:
• the DC IN socket on the main unit.
• the wall socket.
Set clock
1
In standby mode, press and hold CLOCK
SET on the remote control for two
seconds.
» [SET CLOCK] (setclock)scrollson
the display.
2 Press CLOCK SET again.
» The 12/24 hour format blinks.
EN
MCM2050_12_UM_book 1_V5.0.indb 10 2017/6/6 15:41:47
Loading ...
Loading ...
Loading ...