Loading ...
Loading ...
Loading ...
26
ENG
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
When attaching the Sound Bar Supporter
to the TV set, place the screen facing
down on a cushioned table or flat surface
to protect the screen from scratches.
Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the TV
may tilt forward after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
The sound bar supporter only uses for
wall mounting.
After assembling the Sound Bar Wall
Mount Brackets, do not adjust the angle
of the TV while holding the Sound Bar or
hanging onto the Sound Bar.
When lifting the product, or moving it,
make sure that two or more people safely
lift it and set it upright on a flat surface.
When there are two people, one person
should stand on the right side of the
product and the other person should
stand on the left side to lift it.
When moving the product, hold the top
and bottom corners.
When lifting the product, or moving it,
do not hold the Sound Bar. If you hold
the Sound Bar when lifting the product,
or moving it, the Sound Bar may be
damaged.
<When lifting the product>
<When moving the product>
NOTE
Remove the sound bar supporter before
installing the stand by performing the
sound bar supporter attachment in
reverse.
The Screw Cover will protect the opening
from accumulating dust and dirty.
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Loading ...
Loading ...
Loading ...