Loading ...
Loading ...
Loading ...
Drill four 8mm diameter holes on the wall to the place where the unit will be placed with
the distance shown in (Figure-1).
Insert the 8mm diameter wall plugs, supplied with the unit, into the holes.
Mount two of the L shaped legs on the wall using the 4
×
35screws supplied with the unit.
Mount the other L legs on the unit using the M5 screws and the small wrench as shown in
(Figure-2). (corresponding nuts are already built in on the body of the unit)
Mount and fix the L shape legs on the wall and on the unit respectively, using the M8
×
13
bolts and nuts and the washers as shown in (Figure-3) and tighten by using the wrench
supplied.
Figure-4
Depending on the area to be heated the angle of the unit can be adjusted between 0-45
degrees by the help of M8 Bakelite head bolt and nut fixture.
Before operating the unit joints should be checked once again.
Installation positions: Attention! Fixing only at ±5°horizontally is of great importance for
permanent operation.
5°or more slope
WRONG WRONG RIGHT
Loading ...
Loading ...
Loading ...