Loading ...
Loading ...
Loading ...
5. Hang the Cups at the top of the Fountain on the
hook below the water spout. Insert a splash guard
into each of the cups.
6. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing. Make
sure the water completely submerges the pump
and the water runs clear during operation.
NOTE: We recommend that you use distilled water
to prevent scale build-up. The first time you operate the
pump it can take up to 5 minutes for the air to be
completely expelled and water begins to flow properly
7. Plug the pump cord into your local power supply.
Make sure that there is no water around the plug &
always keep the power source in a dry place.
8. Now adjust the water pump to your flow
preference. (see Quick Tip #1) Once set, replace
the Fountain Top. Now place the rocks in your
desired location around the Fountain Base.
9. Congratulations, your fountain is now complete.
Don’t forget to add water regularly as water will
evaporate over time.
Relax and enjoy your new fountain
6
7
Loading ...
Loading ...