Loading ...
THANK YOU FOR YOUR PURCHASE
The MD100 dehumidifier is designed to be used in small confined spaces where a standard
dehumidifier cannot be used e.g. drawers, cupboards, storage boxes, cars, caravans, boats
etc.
SAFETY PRECAUTIONS
Keep the dehumidifier away from children; this is not a toy.
Do not cover the unit while recharging or in use.
Place the dehumidifier upright with the charging socket on the top during charging.
Ensure the dehumidifier is placed on a heat resistant surface during charging.
This product does not contain any cobalt chloride and changes colour using the
silicon dioxide method.
TECHNOLOGY
Each unit contains desiccant water glass technology crystals. Those crystals are very
absorbent with an absorption rate much higher than traditional soluble absorbing products.
The dehumidifier does not need any power to operate.
The desiccant crystals are colorless, odorless and non-toxic and will not re-release moisture
back into the air until the unit is recharged. This new glass desiccant technology is the most
efficient way to absorb moisture where traditional dehumidifiers cannot be used.
HOW TO USE
1. Charge the unit by plugging it into a wall outlet. Ensure the unit is upright with the
charging socket on the top while it is being charged.
2. When the water glass crystals are colourless or blue, the product is ready for use.
3. Place the unit where you require moisture to be eliminated. The water glass crystals in
the unit will absorb moisture automatically.
4. When the water glass crystals turn pink, the unit has absorbed a significant amount of
moisture.
HOW TO CHARGE
1. Place the dehumidifier on a heat resistant surface with the power socket facing upwards.
2. To discharge the moisture, simply plug the unit into a wall socket for 10-15 hours. The
water glass crystals will return to colourless or blue, indicating that the unit is ready for
use again. Do not charge the unit for more than 18 hours.
3. We advise to charge in a well ventilated area or in a space where a traditional
dehumidifier is used, as during charging the moisture collected will be released.
PLEASE NOTE: This dehumidifier uses very small heaters during charging to heat the
crystals and release the moisture collected. As such the unit will get warm during charging.
Adequate space must be left around the unit to allow the heat and moisture to be dissipated.
Loading ...
Loading ...