Loading ...
Loading ...
Loading ...
24
HOW TO USE AND OPERATE
When the lamp is lit, this means that the
salt dispenser is almost empty.
Refill the Salt dispenser chamber as soon
as possible.
7. Drying
■To assist drying, we recommend that the
door be partially opened after the cycle.
The display will indicate Cd(cool dry) for a
further 60 minutes after the end of the cycle
time. It can be interrupted or terminated by
simply opening the door.
■The use of rinse aid is recommended for
optimum drying results.
■Select the Extra Hot option to get better
drying results.
When the salt container is empty, the salt refill
lamp will automatically turn on during
operation, unless the Hardness level has been
set to H0. (see page 14.) The salt should be
refilled after the cycle has finished.
We recommend the salt refilling should always
be carried out, as mentioned on page 15, prior
to starting the next operation. This will
immediately thin and drain away any excess
salt solution.
■ For refilling Salt
NOTE
• After filling with salt, it may take a little
while before the indicator light turns off.
• When the control is set to , it is not
necessary to fill up with salt as no salt is
consumed while the dishwasher is
operating, nor will the salt indicator light
up when the salt container is empty. If the
control is set between and , then
salt must be added to the salt dispenser.
• Do not pour detergent into the salt
dispenser. This will destroy the water
softener dispensing mechanism.
WARNING
Loading ...
Loading ...
Loading ...