Loading ...
Loading ...
Loading ...
37
4
5/16”
Nut
Driver
Attach canopy to duct cover/soffit. Seal top of hood to
duct with aluminum tape.
3
To install ventillation kit
refer to ventillation kit
installation instructions.
Run duct work down to bottom edge of duct cover/soffit
and secure in place. Make sure the duct does not stick
down past the cover.
•Install larger center spacer in middle of canopy
•Slide grease trough down into filter support with lip
facing upward
•Attach long edge of side spacers to outer side of baffle
filters to installed next to canopy. Number of filters will
vary due to size. Spacers only go on the (4) filters next to
canopy.
•Insert small center spacer (36” and 42” models only).
•Slide top part of baffle filter up and under large center
spacer.
•Push bottom of filter up and into grease trough.
Grease Trough
Large Center
Spacer
Side spacer
Center spacer
5
Installation(VCIH/CVCIH Island Hoods)
Loading ...
Loading ...
Loading ...