Loading ...
Loading ...
Loading ...
Rev.070216-MZ
Support bar installation
(for models
1. Position the
center support bar (E)
hole on each end of the support bar with the
Then fasten with the
M6x12 screws (I).
2. Position the
Corner support bars (
below in fig 2. Align the holes on each end of the corner support bars with the M6 hex screws located
on the vertical and horizontal frame sections. Then fasten with the
Move the
M6 hex screw (
Corner Support Bar
Figure 1
Center Support bar
Align the M6
screws with the
two holes on the
Corner Support
Bars.
www.elitescreens.com
(for models
180” and above):
center support bar (E)
and M6 hex screws (G)
in the areas of the frame shown in fig 1. Align the
hole on each end of the support bar with the
M6 hex screws (G) loca
ted at the top and bottom frame
M6x12 screws (I).
Corner support bars (
O) and M6 Hex screws (G)
in the areas of the frame as shown
below in fig 2. Align the holes on each end of the corner support bars with the M6 hex screws located
on the vertical and horizontal frame sections. Then fasten with the
M6x12 screws (I
M6 hex screw (
G) to these areas of the frame.
Align the M6 Screws
with the two holes
located on the Center
Support Bar.
Corner Support Bar
8
in the areas of the frame shown in fig 1. Align the
ted at the top and bottom frame
sections.
in the areas of the frame as shown
below in fig 2. Align the holes on each end of the corner support bars with the M6 hex screws located
M6x12 screws (I
).
Loading ...
Loading ...
Loading ...