Loading ...
Loading ...
Loading ...
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
2
1
Step 4 Install the shelf supports in the
opposite sequence.
HOW TO REMOVE AND INSTALL: DOOR
You can remove the door and the internal glass
panels to clean it. The number of glass panels is
different for different models.
WARNING! The door is heavy.
CAUTION! Carefully handle the glass,
especially around the edges of the
front panel. The glass can break.
Step 1 Fully open the door.
A
A
Step 2 Lift and press the clamping
levers (A) on the two door
hinges.
Step 3 Close the oven door to the first
opening position (approximate-
ly 45° angle). Hold the door
with one hand on each side
and pull it away from the oven
at an upwards angle. Put the
door with the outer side down
on a soft cloth on a stable sur-
face.
45°
Step 4 Hold the door trim (B) on the
top edge of the door at the
two sides and push inwards to
release the clip seal.
1
2
B
Step 5 Pull the door trim to the front
to remove it.
Step 6 Hold the door glass panels on
their top edge one by one and
pull them up out of the guide.
21
Loading ...
Loading ...
Loading ...