Avanti WCF51S3SS Designer Series 24" Stainless Frame Wine Chiller With Seamless Door

User Manual - Page 11

For WCF51S3SS.

PDF File Manual, 20 pages, Read Online | Download pdf file

WCF51S3SS photo
Loading ...
Loading ...
Loading ...
11
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
When you use the wine chiller for the first time or restart the wine chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the wine chiller is running for a few hours everything will be back to normal.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able
to store may vary.
NOTE: Capacity:
Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and
include bulk storage.
INTERIOR LIGHT
Interior lights are available in both upper and lower zones.
You can turn the interior light on in each zone by touching the mark
.
The lights will turn off automatically if it remains ON for 10 minutes or more. You have to touch the
mark
again and the light will turn back on.
Pull-out Roller Shelves
To prevent damaging the door gasket, make
sure to have the door all the way opened when
pulling shelves out of the rail compartment.
For easy access to the bottles, you must pull the
shelves approximately 100% out of the rail
compartment.
To remove the shelves out of the rail pull each shelf approximately 100% out. Use a long flat
screwdriver to press down the right plastic notch as shown in Figure A and at the same time lift
the left plastic notch as shown in Figure B. Then proceed to pull out the shelf slowly. Contact our
service department if assistance is needed.
Figure A
Figure B
Loading ...
Loading ...
Loading ...