Loading ...
Loading ...
3. Holding the side shelf, install 2 shoulder bolts (3/8 shoulder bolt) through the slots on the side shelf brackets into
the threaded holes on the side of the side shelf tray (Fig. 05). Tighten with a 3/16 Allen wrench (Fig. 06).
4. Locate the cart on flat level ground before attempting to level the side shelves. Place shelf in the up position and
check that it is level.
If the shelf is not level, adjust side shelf set screws. The set screws can be adjusted using a 3/32 Allen wrench
(Fig. 07). Turn the Allen wrench clockwise to raise the shelf. Turn 1/4 turn and review to see if the shelf is level.
The set screws in the left and right bracket should be adjusted equally to ensure the shelf sits level (Fig. 08).
Optional wood cutting board (model # CAD-WBC, 70861) shown in Figure 09 can be purchased as an accessory
from Customer Care at (888) 281-5698.
3
Fig. 07
Fig. 05
Fig. 06
Fig. 08
Fig. 09
Loading ...