Loading ...
Loading ...
Loading ...
8 | Sub-Zero Customer Care 800.222.7820
INSTALLATION
Installation
VERIFY ICE PRODUCTION
1 Press “POWER” to turn the ice maker on.
2 Add one gallon (3.8 L) of cold water to the ice bin. Verify
the water completely drains from the ice bin and there
are no leaks. If the water has not drained within 60 sec-
onds, there may be a kink in the drain tube or the drain
installation is incorrect.
3 Press “CLEAN”. Wait three minutes until the CLEAN light
ashes, then add 1 tablespoon
(15 ml) of undiluted ice
maker sanitizer directly into the spray area. Refer to the
illustration below. Use only the sanitizer made for the
Sub-Zero ice maker available at subzerowolfstore.com.
For questions, contact Sub-Zero Customer Care at
800-222-7820.
Water shutters location
WATER
SHUTTERS
4 A 10-minute sanitizing cycle begins, followed by eight
rinse cycles. When the process is complete, the CLEAN
light will no longer be illuminated. The entire cycle takes
approximately 30 minutes.
5 At initial start-up, the ice maker will need approximately
30 minutes to freeze ice cubes and up to ve minutes to
harvest. Verify completion of the rst cycle ice produc-
tion to conrm proper installation.
Loading ...
Loading ...
Loading ...