Loading ...
Loading ...
Loading ...
Body Assembly
Step 1 - Unscrew the ring and
Base locking screw from the pole.
Step 2 - Insert the pole through
The hole in the center of the
Stand base, and twist into position.
Step 3 - Turn the base upside down with the
pole facing the floor and place the base
weight support to the bottom of the stand
base. Tighten the base weight support to the
stand base with the base locking screw.
Step 4 - Unscrew the tilt-lock nut from the
motor unit.
Step 5 - Put the motor unit into the pole.
Reinsert and tighten the tilt-lock nut.
Fan Grill Assembly
Step 1 - Align the rear grill on the motor
unit, then screw in the 4x rear grill screws to
secure it in place.
Step 2 - Install the blade onto the motor shaft
by tightening the blade screw.
Step 3 - Centre the front grill by aligning the
central logo so it is horizontal and parallel to
the floor. Then, secure the front and rear grills
completely together by snapping 5x grill clips
into place.
Step 4 - Tighten the grill locking screw at the
bottom of the rear grill.
Assembly
Loading ...
Loading ...
Loading ...