Loading ...
Loading ...
Loading ...
42
Operating Instructions
If, after reading these Operating Instructions, you have additional questions related to the use of your
Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents
only) or (416) 499-SONY (7669) (Canadian residents only).
There is no
window picture
or it is just
static
Be sure your window picture is set to a video source/
channel that has a program airing.
You may be tuned to a video input with nothing
connected to it. Try cycling through your video inputs
using the yellow PIP TV/VIDEO button with the red
dot (page 18).
PIP is not set to receive a signal from the AUX input. If
you have connected a VCR, DVD or Satellite Receiver
to the AUX input on the TV, it will not show in the
small window picture.
I get the same
program in the
window picture
as in the main
picture
Both may be set to the same channel. Try changing
channels in either the main picture or the window
picture (pages 18-19).
Your TV may be set up to select all your channels
through a cable box. The cable box will only
unscramble one signal at a time, so you cannot use the
PIP feature. If possible, run a direct cable to the VHF/
UHF jack on your TV. This will only work if your cable
system provides an unscrambled signal (page 5).
You lost your
remote control
You can use the front Audio/Video panel controls to
access the menu. Press
to open the menu. Use the
or buttons on the front Audio/Video panel
instead of the
F or buttons on the remote control.
Use the
button on the front Audio/Video panel
instead of the
G, g, and buttons on the remote
control. Press again when the setting or
adjustment is complete. Contact your nearest Sony
dealer to order a replacement.
F
Loading ...
Loading ...
Loading ...