Loading ...
Loading ...
Loading ...
3
The remote control keys
1 Screen information
In digital mode, press once to display the information
banner, a 2
nd
time to get more information on the
programme and a 3rd time to remove it (see p. 4).
In analogue mode, this displays / removes the
programme informations(number, name, sound
mode). Hold down for 5 seconds to permanently
display the analogue programme number on the
screen.
2 Subtitle mode
To activate/deactivate the subtitle mode
3 Select EXT sockets
(see p. 16).
4 Mode selector
To activate the remote control in VCR or DVD
mode (see p. 17).
5 TV Menu
To display or exit from the analogues menus
6 Select
In digital mode this displays / clears the programme
list. Use the
îÏ keys to select a programme and
u to display it.
7 Volume
To adjust the sound level
8 Mute
To disable or enable the sound.
9 16:9 formats (p. 15)
! Previous programme
To access the previously viewed programme.
Numerical keys
For direct access to programmes. For a 2 (3) digit
programme number, the 2
nd
(3
rd
)digit must be
entered before the dash disappears.
The number, the
name (and the sound
mode, in analogue mode) are
displayed for a few seconds.
The Mono indication is red when in forced position.
# Picture and sound settings
Accesses a series of picture and sound settings.
The position Personal corresponds to the settings stored in
the menus.
$ Standby
To set the TV to standby mode.To switch the TV set
on again, press
b,P @#or 09.
% Options menu
(see p. 9).
& TV guide
(see p. 9).
( Teletext features (p. 14)
and VCR/DVD keys (p.17).
) Digital Menu
To display or exit from the digital menus (when TV is in
digital mode).
~ Analogue or Digital mode
To switch the television between analogue and digital
mode.
+ Cursor
These 4 keys are used to move within the menus or to
directly access the 16:9 screen formats (p 15).
, Programme selection
To access the next or previous programme (or page in
digital menus).
- Sound mode
To switch from
Stereo to Mono or to choose
between different languages (Dual I, Dual II, ...).
When the sound mode is switched to
Mono, the indication is
displayed in red.
. Surround sound
To activate / deactivate the surround sound effect.
In stereo, this gives the impression that the
speakers are further apart. In mono, a stereo spatial
effect is simulated.
To receive TV channels, your television is equipped with 2 tuners. One is for digital channels, the other is
for analogue channels. Use the
v key of the remote control to switch the TV between analogue and
digital mode.Then use the
P @#or 09keys to select channels.
Digital or Analogue channels ?
11
• Plug the TV into a 220V – 240V AC, 50 Hz supply.
• Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– a bright white line is displayed across the screen.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
• Cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth.
• No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vicinity.
• Do not place your TV set under direct sunlight or heat.
• Do not cover or block the TV as it could lead to overheating.
• Leave at least 5 cm around each side of TV set to allow for proper ventilation.
• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water.
• Battery Usage CAUTION – To prevent battery leakage that may result in bodily injury, property damage, or damage
to the unit:
– Install all batteries correctly, with + and – aligned as marked on the unit.
– Do not mix batteries (old and new or carbon and alkaline, etc.).
– Remove batteries when the unit is not used for a long time.
Useful Tips
• Do not leave your set on standby mode for a prolonged
period of time. Switch off set to allow it to be demagnetised. A demagnetised set supports good picture quality.
• Do not shift or move the set around when it is switched on. Uneveness in colour in some parts of the screen may occur.
• Never attempt to repair a defective TV yourself. Always consult a skilled service personnel.
Safety Information
Loading ...
Loading ...
Loading ...