ONE FOR ALL URC7935 User Manual

Loading ...

SETUP SETUP

APP SHORTCUT FEATURE

MULTICOLORED RING

MORE FUNCTIONS ONLINESETUP

Hints:

• If the red LED shows one long blink at step 4, the function was not learned correctly, please

try again from step 2.

• If you ﬁ nd one or more keys don’t work properly after set up, you can re-enter the learning

mode at any time by repeating the procedure from step 1.

• To delete a learned function, hold down Streamer Power and Mute until the red

LED blinks twice, and press the key to delete twice.

• If one or more of your original remotes aren’t working, you can still set up the One For All

remote by SimpleSet (B) or Code Set Up (C).

• After Learning, default color of the Menu Ring LED is red. If you would like to change this,

see “Choose Color”.

* Some remotes send commands diﬀ erently. If you ﬁ nd a function cannot be learned, try

holding down the key on the original remote instead of pressing and releasing.

To control a Roku TV of the brand TCL, Element, Philips, Magnavox, JVC, LG or Haier, just insert

batteries and the remote is ready. If you have a Roku TV of the brand RCA or Hisense, try this too

and if your TV responds when you press some keys, the remote is ready to use.

Otherwise to set up a Hisense, RCA, Sharp or Sanyo Roku TV:

Hold down STB POWER and HOME until the red LED blinks twice

Press the HOME key 5 times

The LED will blink green twice and the remote should now work your Roku TV.

To set up an Insignia Roku TV

Hold down STB POWER and HOME until the red LED blinks twice

Press the REPLAY key 5 times

The LED will blink green twice and the remote should now work your Roku TV.

If you want to reset the remote to control a TCL Roku TV

Hold down STB POWER and HOME until the red LED blinks twice

Press the BACK key 5 times

The LED will blink green twice and the remote should now work your Roku TV.

B  SETUP BY CODE

C  LEARNING

D  SETTING UP A ROKU TV

Turn on your device (not on standby) and point the OFA remote towards it.

To set up:

2a TV

Hold down TV POWER and BACK keys until the yellow LED

under the ring blinks twice.

STREAMER / DIGITAL MEDIA BOX

Hold down STREAMER POWER and HOME - until the red LED

under the ring blinks twice

AUDIO RECEIVER, SOUND BAR

Hold down VOLUME + and VOLUME  until the Green LED

under the ring blinks twice.

Enter the ﬁ rst 5 digit code listed for your brand (e.g. 11565 for Zenith TV).

The green LED will blink twice.

Now aim the remote towards your device and press the Power (or Mute*) key.

If the device turns oﬀ (or mutes*), your remote is ready to use. If not, repeat steps 2-5 with

the next code in the list.

* If you are setting up an Audio Video Receiver or Sound Bar, please try the Mute key during

step 5.

After SimpleSet or Code Setup

Your One For All remote can operate up to three devices. Most keys will control your streaming

box, but you can control some functions of your TV and Sound Bar or Audio Video Receiver

If you set up a TV, the Volume Up, Down, Mute, TV Power and TV Input keys will then control your TV.

The menu ring will light up in yellow to show you are controlling the TV.

If you then also set up an Audio Device such as a Sound Bar or Audio Video Receiver, the remote

will then control the Volume Up, Down and Mute of that device. The menu ring will light up in

green to show you are controlling the Audio Device.

Input Shift

As the TV Input key is intended to select the input on your TV and most TVs use a menu to select

from a list of inputs, when the TV Input key is pressed and a TV is set up, the Menu Up, Down,

Left, Right and OK keys temporarily control the TV. If the OK key is pressed, or no key is pressed

for ten seconds, these keys will revert to controlling your streamer.

The OFA Streamer features 4 App Shortcut keys for viewing streamed content. If your original

remote control already had a key for this - for example many Roku streamers will have a Netﬂ ix

and Vudu key - then this key will perform exactly the same as the key on your original remote.

If your streamer supports these keys, they will function as Netﬂ ix, Hulu, Vudu and YouTube.

However if you did not have a key like this, you can use this key as a shortcut to a streaming app

by programming a macro on it. You can set a macro to any service supported by an app on your

streaming device. So if you would prefer HBO Now or Plex, no problem.

To program the macro, you ﬁ rst need to know the sequence of keys you need to press to always

bring up the service you prefer, For example on an Apple TV, the sequence for Netﬂ ix is Back

(or Home), Menu Down and OK.

Once you have determined the sequence for your device, follow these steps:

Sit in front of your device with It switched on (not on standby)

Hold down the App Shortcut key (for example the “N” key) until the LED blinks twice

Now perform the sequence of keys exactly as would normally. The remote will operate your

device and the macro is recorded in real time - so if it normally takes a few seconds for your

device to react don’t worry.

One you have ﬁ nished the sequence - and the Streaming Service has started on your device

- hold down the App Shortcut key until the LED blinks green twice and goes out. The macro

is now stored.

Tips

• Make sure the Streamer Is operating the device in question before programming

• If you ﬁ nd the Macro doesn’t work as expected, you can just repeat the same sequence to

reprogram

• When programming, wait for your device to respond ﬁ rst, the remote will remember the

timing

Although all the major features of your One For All remote are covered in this guide, there is even

more functionality available online. For example you could set the remote into a “CEC Mode” that

may control streamers that cannot be controlled by infrared, or potentially reprogram the input

key to always select the same input on your TV. You can ﬁ nd tutorials, tips and extra info for this

remote and others at:

www.oneforall.com/universal-remotes/urc-7935-streamer-remote

CHOOSE COLOR

Once you have set up your devices, the color of the menu ring reﬂ ects the devices you are

controlling. For TV functions, the ring is yellow, for Audio green and for your streaming device it

can be red, or a brand color if you used the SimpleSet method.

However if you’d prefer to choose your own color to represent streamer control, you can. There

are dozens of shades to choose from, and the procedure is simple.

To perform this:

Hold down Channel Up and Channel Down until the ring blinks twice

red

Press the Channel Up key. The ring will light up white

and stay lit

Now each press of the Channel Up key will change the ring to a

diﬀ erent color. Pressing Channel Down will take it back to the previous

color. There are over 100 diﬀ erent shades to choose from.

Once you have found the color you like, press and hold down the OK key.

The ring will blink twice in the current color. From now on, when you are controlling your

Streaming box the ring will light up in the color you have chosen.

• If you reach the last color, the ring will blink red twice and the color will not be stored.

• If you do not press a key for 10 seconds, the light will go out and no color will be stored

• If you want to change the color at any point, just repeat the process.

Your One For All remote control can learn any function from any other working remote control.

This is a quick and easy one-time setup that allows to control any infrared controlled device

you have in your living room. You can even combine multiple devices in one easy to use remote

control – for example you could teach the volume keys to control your Sound Bar, the TV Power

and Input keys to control your TV, and the rest of the keys to control a Streaming box.

To do this, ﬁ rstly make sure you have all your original remote controls to hand, and that they

have working batteries in.

To learn functions, the original remote should be approximately 3cm from the OFA remote,

pointing towards it as shown below:

Hold down TV Power and Mute until the red LED blinks twice.

Press and release the key you want to learn a function onto (for example the TV Power

key) – The red LED will blink once and go out.

Press and release* the corresponding key on the original remote, for example Power.

The LED will blink green twice to indicate the key has been learned correctly.

Repeat steps 2 and 3 for each key you want to learn – remember you can learn from multiple

remotes, but only one function per key.

When you learned all the functions you require, press and hold TV Power key until the green

LED blinks four times.

2 - 5 CM

COLOR MATCH

Fully customizable

The ring around the menu directional keys lights up in a number of diﬀ erent colors. During

programming the colors will guide you through the setup process, and after you have set up

your devices they will indicate which device you are controlling.

When controlling TV, the ring will light up yellow, and when controlling a Soundbar or Audio/

Video Receiver it will be green. The color for the Streamer can change depending on the setup

method and the brand of your streaming device. The One For All remote is pre-programmed for

a Roku streaming box so the default color is purple, and if you follow the SimpleSet procedure

to set up another brand (see SimpleSet), it will change to a color associated with the brand you

chose, for example dark green for a Microsoft XBox.

If you set up using a code (see Code Setup), the color for your streamer will be red.

You can even choose a color yourself – see the section Choose Color.

If the brand of your device is not listed in the SimpleSet feature, you can set up by trying codes

individually. To do this ﬁ rstly locate your brand in the Code List. Brands a listed by device type;

TV, Streamer or Audio (Receiver or Soundbar).

Each code consists of 5 digits, which can be entered by using the following keys to represent

the digits 1-6:

Streamer QSG_Walmart VS.indd 7-12 06-03-19 12:11

Loading ...

ONE FOR ALL URC7935 Streamer Remote Control

User Manual - Page 9