Loading ...
Loading ...
Loading ...
CEA2006 Specifications
Power output ............................. 60 W RMS × 4 Channels (at
14.4 V, 4 W and ≦ 1 % THD
+N)
S/N ratio ....................................... 78 dBA (reference: 1 W into
4 W)
GM-A4704
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Current consumption ............ 20.5 A (at continuous power,
4 W)
Average current consumption
..................................................... 5.5 A (4 W for four channels)
8.5 A (4 W for two channels)
Fuse ................................................ 30 A × 1
Dimensions (W × H × D) ...326mm × 60 mm ×
215 mm
(12-7/8 in. × 2-3/8 in. ×
8-1/2 in.)
Weight .......................................... 2.0 kg (4.4 lbs)
(Leads for wiring not in-
cluded)
Maximum power output ....... 80 W × 4 (4 W) / 130 W × 4
(2 W) / 520 W TOTAL
(BRIDGE)
Continuous power output ... 40 W × 4 (at 14.4 V, 4 W,
20 Hz to 20 kHz ≦ 1 % THD
+N)
130 W × 2 (at 14.4 V, 4 W
BRIDGE 1 kHz, ≦ 1 % THD
+N)
65 W × 4 (at 14.4 V, 2 W,
1 kHz, ≦ 1 % THD+N)
Load impedance ...................... 4 W (2 W to 8 W allowable)
Frequency response ............... 10 Hz to 70 Hz (+0 dB,
–3 dB)
Signal-to-noise ratio ............... 94 dB (IHF-A network)
Distortion ..................................... 0.05 % (10 W, 1 kHz)
Low pass filter:
(A ch)
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
(B ch)
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
High pass filter:
(A ch)
Cut off frequency ........... 40 Hz to 500 Hz
Cut off slope ..................... –12 dB/oct
(B ch)
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
Gain control:
RCA ...................................... 0.3 V to 6.5 V
Speaker .............................. 3.0 V to 26 V
Maximum input level / impedance:
RCA ...................................... 6.5 V / 22 kW
Speaker .............................. 26 V / 16 kW
CEA2006 Specifications
Power output ............................. 40 W RMS × 4 Channels (at
14.4 V, 4 W and ≦ 1 % THD
+N)
S/N ratio ....................................... 78 dBA (reference: 1 W into
4 W)
Notes
! Specifications and the design are subject to
modifications without notice.
! The average current consumption is nearly
the maximum current consumption by this
unit when an audio signal is input. Use this
value when working out total current con-
sumption by multiple power amplifiers.
En
Additional information
5707000011290S <16>
Loading ...
Loading ...
Loading ...