Loading ...
1. Remove lid (A) by twisting counterclockwise.
2. Remove o-ring gasket (B) from underside of lid (A).
3. Wash all parts separately, then re-assemble o-ring gasket (B) with flat side facing lid (A).
a. Ensure gasket (B) is properly seated to minimize leaking.
4. Fill container with contents. Do not overfill: Leave space for the lid (A), to avoid overflow.
5. Replace lid (A) by twisting clockwise.
See WARNINGS Section below for further details.
Push-Button Spout Bottle:
Image for reference only: actual product may vary
1) Remove lid (D) by twisting counterclockwise.
2) Press the push-button (D1) on the lid (D) to open lid cover (E).
3) Pull out spout gasket (E1) from underside of lid cover (E) to completely remove it.
4) Remove o-ring gasket (F) from underside of lid (D).
a. Wash all parts separately and re-assemble.
5) Ensure gaskets (E1 and F) are properly seated to minimize leaking.
6) Fill container with contents. Do not overfill: Leave space for the lid (D), to avoid overflow.
7) Replace lid (D) by twisting clockwise.
8) To drink, press the push-button (D1) located on the lid (D) to release the lid cover (E) and
reveal the drink opening.
9) When finished drinking, close the lid cover (E) until it snaps securely into place.
10) Raise carry loop located on top of lid cover (E) for easy handling of product.
Loading ...
Loading ...
Loading ...