Loading ...
Loading ...
Loading ...
10
WARNING: The power cord supplied with the appliance is connected to the appliance with a type Y
connection (in compliance with standards EN 60335-1, EN 60335-2-6 and subsequent amendments) for
which it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to
avoid a hazard.
In the event of wear or damage to the mains cable, replace it with :
Type/ section of mains cable H05VV-F 3x0,75 mm2 or H05RR-F 3x0,75mm2
WARNING: If you replace the electric mains cable the installer must have the earth conductor about 2
cm longer than the phase conductors and must also take heed of the warnings regarding electric
connection.
After-sales technical service and spare parts
Before leaving the factory, this appliance was tested and adjusted by specialist skilled staff to give the best
operating results. Any subsequent necessary repairs or adjustments must be carried out with the greatest
care and attention by authorised personnel. For this reason, we strongly advise you contact the Bertazzoni
Service Center, specifying the nature of the problem, the model of the equipment and the serial number.
This data is provided on the data label adhered to the base of the appliance and on the duplicate data label.
Always use original Bertazzoni spare parts.
BERTAZZONI GROUP ABN 38 069 686 326
650 Bridge Road, Richmond, Victoria 3121
Service & Spare Parts: 1300 748 308
Bertazzoni After Sales Service - P.O. Box 543 SOMERTON VIC 3061
Email: [email protected]
Fig 1
Fig 2 Fig.3
Loading ...
Loading ...