IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed including
the following:
• Read all instructions.
• Portable – To protect against risk of electrical
shock do not put cord, plug, or motor housing in
water or other liquid.
• Close supervision is necessary when any
appliance is used by or near children.
• Unplug from outlet when not in use, before
putting on or taking o parts, and before
cleaning.
• Avoid contacting moving parts.
• Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return
appliance to the nearest authorized service
facility for examination, repair or electrical or
mechanical adjustment.
• The use of attachments not recommended or
sold by the manufacturer may cause re, electric
shock or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or
counter.
• Do not place on or near a hot gas or electric
burner, or in a heated oven.
• When mixing liquids, especially hot liquids, use a
tall container or use a small quantity at a time to
avoid splattering or burning.
• Keep hands and utensils out of container while
blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper may
be used but must be used only when the blender
is not.
• The blades are VERY sharp. Handle carefully.
• To reduce the risk of injury, never place cutter
assembly blades on the base without the pitcher
attached.
• Always operate the blender with the lid in place.
• When blending hot liquids, remove the center
piece of the two-piece cover.
• FOR HOUSEHOLD USE ONLY.
• Do not use this appliance for other than the
intended use.
• ALWAYS unplug the appliance before assembling,
disassembling, cleaning, or storing.
• The appliance must be kept out of reach of children.
• Do not hold the motor housing under running
water, nor immerse it in water.
• The appliance is constructed to process normal
household quantities.
POWER CORD SAFETY TIPS
A short power supply cord is provided to reduce the
hazards resulting from entanglement or tripping over
a longer cord. This appliance has a polarized plug (one
blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to t into a
polarized outlet only one way. If the plug does not t
fully into the outlet, reverse the plug and try again. If it
still does not t, contact a qualied electrician. Do not
attempt to modify the plug in any way.
• DO NOT OPERATE APPLIANCE IF THE CORD
SHOWS ANY DAMAGE, OR IF APPLIANCE WORKS
INTERMITTENTLY OR STOPS WORKING ENTIRELY.
• Never pull or yank on the cord or the appliance.
• To insert the plug, grasp it rmly and guide it into
the outlet.
• To disconnect the appliance, grasp the plug and
remove it from the outlet.
• Before each use, inspect the cord for cuts and
abrasion marks. If any are found, the blender should
be replaced.
• Never wrap the cord tightly around the appliance,
as this could place undue stress on the cord where
it enters the appliance and cause it to fray and
break.
• An extension cord may be used with care. However,
the marked electrical rating shall be at least as great
as the electrical rating of this appliance. The
extension cord should not be allowed to drape over
the tabletop where it can be pulled on by children
or tripped over.
SAVE THESE
INSTRUCTIONS
PACKAGE CONTENTS
• Blender
• Quick Setup Guide
FEATURES
• Powerful 350 Watt motor
• 1.25L plastic pitcher
• 5 speeds with pulse for precise blending control
• Detachable stainless steel blade for easy cleaning
• Filler cap cover
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide
|
NS-BL01-B/NS-BL01-R
Insignia Blender
BEFORE USING YOUR BLENDER
• Unpack the blender and wash the lid, measuring
cup, plastic pitcher, gasket, and cutting blade
assembly in hot, soapy water before use. The lid,
cup, and cutting blade assemblies must be
disassembled before washing.
Warning: Handle the blade assembly carefully. The blades
are very sharp.
• To remove the measuring cup from the lid, twist the
cup until the tabs on the cup line up with the
notches on the lid, then pull the cup from the lid.
• After washing parts, rinse and dry thoroughly. Wipe
the blender base with a damp cloth or sponge to
remove any packaging dust.
Caution: Do not immerse the blender base, cord, or plug
in water or other liquids. Liquids will damage these parts.
Note: This appliance is for HOUSEHOLD USE ONLY. It should
be plugged into an AC electrical outlet (ordinary household
current). Do not use any other electrical outlet.
ASSEMBLING YOUR BLENDER
1 Place the blender base on a at, level surface. DO
NOT PLUG IN THE POWER CORD UNTIL THE
BLENDER IS COMPLETELY ASSEMBLED.
2 Place the gasket on the cutting blade assembly.
3 Place the assembly inside the pitcher collar, then
rotate the assembly counter clock wise until it locks
into place.
4 Place the cup in the pitcher lid on, then place the lid
on top of the pitcher.
5 Place the pitcher onto the blender base and rotate
clockwise until the it locks into place.
Pitcher collar
Gasket
Cutting blade
assembly
Plastic pitcher
Speed buttons
OFF/Pulse button
Blender base
Pitcher collar
Measuring cup
Stainless
steel blade
Lid
Loading ...
