Loading ...
Loading ...
Loading ...
(148,1)
北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
NOTE
. When operating the push-button
ignition switch, firmly press it.
. If you press the push-button ignition
switch quickly, the power may not turn
on or off.
. If the indicator light on the push-
button ignition switch flashes in green
when pressing the push-button ignition
switch, steering is locked. When this
occurs, press the push-button ignition
switch while turning the steering wheel
left and right.
! Battery drainage prevention func-
tion
S03AA130301
When the push-button ignition switch is left
in the “ACC” or “ON” position for approxi-
mately 1 hour, the push-button ignition
switch will be automatically switched to
“OFF” to prevent the battery from going
dead. (In CVT models, this function is
activated when the select lever is in the “P”
position.)
! When access key fob does not
operate properly
S03AA1304
Refer to “Access key fob – if access key
fob does not operate properly” F9-18.
Hazard warning flasher
S03AB
Use the hazard warning flasher to warn
other drivers when you have to park your
vehicle under emergency conditions. The
hazard warning flasher works regardless
of the position of the ignition switch.
To turn on the hazard warning flasher,
push the hazard warning flasher switch on
the instrument panel. All the turn signal
lights and the turn signal indicator lights
will flash. To turn off the flasher, push the
switch again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
Meters and gauges
S03AD
NOTE
Liquid-crystal displays are used in
some of the meters and gauges on the
combination meter. You will find their
indications hard to see if you wear
polarized glasses.
& Combination meter illumina-
tion
S03AD01
When you turn the ignition switch to the
“ON” position, the various parts of the
combination meter are illuminated in the
following sequence.
1. Warning lights, indicator lights, meter
needles, gauge needles illuminate.
2. Meter and gauge indications each
show MAX position.
3. Meter and gauge indications each
show MIN position.
4. Regular illumination (for driving) be-
gins.
Instruments and controls/Hazard warning flasher
3-8
Loading ...
Loading ...
Loading ...