Loading ...
Loading ...
Loading ...
2. Overload protection. (See Fig. 7)
Your garden shredder is designed with overload protection. If the shredder is clogged during shredding,
the overload protection will cut the power automatically to protect your shredder. Wait at least 1 minute
before restarting by first pressing the reset button (B) and then the I/O switch.
3. Locking Knob (See Fig. 7)
The garden shredder is equipped with a safety interlock switch on the closure between the cover and
main body. The switch is activated when the cover is securely closed and tightened by the locking knob.
When the cover is open or not secured well, the shredder will not run. Always tighten the locking knob
(D) by turning it clockwise before operation.
5. Blades.
The blades on the rotary plate are reversible. For quality and safety reasons, we recommend that only
identical replacement blades be used should it become necessary to replace them.
D. Locking Knob
OPERATION INSTRUCTIONS
1. Starting and stopping.
Starting: (See Fig. 7)
Make sure the switch is in the off position. Plug the garden shredder into a suitable outlet using an
approved extension cord if necessary. Push the I/O switch to “I” to turn the garden shredder on.
Stopping: (See Fig. 7)
Push the I/O switch to “O” to turn the garden shredder off.
CAUTION: The garden shredder will not operate if the locking knob is loose.
Fig. 7
10
B. Reset Button
I
O
Loading ...
Loading ...
Loading ...