Loading ...
Loading ...
Loading ...
BISSELL.com 9
1. Place the machine on the
3-in-1 Docking Station. Make
sure the solution in the Clean
Water Tank reaches the Clean
Out Cycle line. If it does not, fill
tank with water to that line.
2. Make sure the water in the
Dirty Water Tank is not over
the Full line. If it is, empty
the tank and replace it before
running the Clean Out Cycle.
3. Push the Clean Out Cycle
Button to start the 40-second
cycle. Note: If the battery
runs out the Clean Out Cycle
cannot run until your machine
is docked for 30 seconds.
4. Once the cycle is complete,
remove the Brush Roll by
grabbing the Brush Roll
window and pulling up. Pull
the Brush Roll tab to remove
and put the brush in the drying
tray. The brush and window
can be hand washed.
5. Remove the machine from
the dock and wipe out the tray.
Do NOT rinse under faucet.
This keeps water out of the
charging plug.
6. Empty the Dirty Water
Tank. To remove, press the
button on the top of the tank,
grab the front handle and pull
tank out.
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
After Cleaning Care
Go to support.BISSELL.com for a full list of how-to videos.
CONTINUED ON NEXT PAGE
Loading ...
Loading ...
Loading ...